Getting Started with x86¶

• Table of contents
• Getting Started with x86
  • Prerequisite
  • Demo Specifications
  • Demo Templates

Prerequisite¶

MicroTESK should be installed.

Demo Specifications¶

Specifications of the x86 (8086) instruction set architecture (ISA) can be found in $MICROTESK_HOME/arch/demo/x86/model/x86.nml.

Instruction are described in nML by means of the following constructs (move r16/r16 is taken as an example):

1. the signature
   

   op mov_r16r16 (dst: R16, src: R16)

2. the assembly format
   

   syntax = format("mov %s, %s", dst.syntax, src.syntax)

3. the binary encoding
   

   image = format("1000101111%s%s", dst.image, src.image)

4. the semantics
   

     action = {
       dst = src;
       ...
     }
   

To compile the ISA model, run the following command:

sh $MICROTESK_HOME/bin/compile.sh x86.nml

Demo Templates¶

Test templates for the x86 (8086) ISA can be found in $MICROTESK_HOME/arch/demo/x86/templates.

The directory contains a number of demo templates including the following ones:

block.rb	demonstrates how to use block constructs
block_random.rb	demonstrates how to create randomized instruction sequences using block constructs
euclid.rb	demonstrates test program simulation to predict the resulting microprocessor state
random.rb	demonstrates how to randomize tests by using biases and distributions
random_immediate.rb	demonstrates how to randomize immediate values
random_registers.rb	demonstrates how to randomize registers (dependencies)

Test templates are written in Ruby extended with specific constructs (let us look at block.rb):

1. the code in the beginning includes the x86_base.rb file where a base template X86BaseTemplate is defined and declares a BlockTemplate template:
   

   require_relative ''x86_base''
   
   class BlockTemplate < X86BaseTemplate  # BlockTemplate is a heir of @X86BaseTemplate@
   

2. here comes a run method, which is a template entry point:
   

   def run

3. this block produces a sequence consisting of three instructions:
   

     sequence {                   # sequence: {mov, sub, add}
       mov_r16r16 ax, bx
       sub_r16r16 cx, dx          # registers: fixed
       add_r16r16 r16(_), r16(_)  # registers: randomized
     }.run
   

4. this block produces an atomic sequence consisting of three instructions (atomic sequences are not interrupted while being merged with other ones):
   

     atomic {                     # atomic sequence: {mov, add, sub}
       mov_r16r16 ax, bx
       add_r16r16 cx, dx
       sub_r16r16 r16(_), r16(_)
     }.run
   

5. this block produces three sequences each consisting of one instruction:
   

     iterate {                    # sequences: {{mov}, {sub}, {add}}
       mov_r16r16 ax, bx
       sub_r16r16 cx, dx
       add_r16r16 r16(_), r16(_)
     }.run
   

6. this block produces four sequences each consisting of two instructions
   _{the combinator constructs the Cartesian product of the nested sets of sequences;
   for each tuple of the product, the compositor randomly merges the tuple''s sequences into one):}
   

     block(:combinator => ''product'', :compositor => ''random'') {
       # combinator: {({sub}, {mov}), ({sub}, {sub}), ({add}, {mov}), ({add}, {sub})}
       # compositor: {  {mov, sub},     {sub, sub},     {add, mov},     {sub, add}  }
   
       iterate {                  # sequences: {{sub}, {add}}
         sub_r16r16 cx, dx
         add_r16r16 ax, bx
       }
       iterate {                  # sequences: {{mov}, {sub}}
         mov_r16r16 ax, bx
         sub_r16r16 r16(_), r16(_)
       }
     }.run
   

7. merges two sequences in random fashion; atomic sequences are unmodifiable
   

     block(:combinator => ''diagonal'', :compositor => ''random'', :obfuscator => ''random'') {
       sequence {
         sub_r16r16 bx, ax
         or_r16r16 cx, dx
       }
   
       atomic {
         prologue { comment ''Atomic starts'' }
         epilogue { comment ''Atomic ends'' }
   
         and_r16r16 r16(_), r16(_)
       }
     }.run
   

To generate test program(s) from a test template (in our case, from block.rb), run the following command:

sh $MICROTESK_HOME/bin/generate.sh x86 block.rb --code-file-prefix block --code-file-extension s -v

When generation is finished, the resulting assembly code can be found in $MICROTESK_HOME.

To compile the output file, run the following commands:

nasm -f elf block_0000.s
ld -m i386pe -s -o block_0000 block_0000.o

To execute resulted test cases is possible by means of the online simulator