C++TESK Testing ToolKit

h1. Installation Guide

h2. Introduction

This document describes the steps should be followed to install "С++TESK Testing ToolKit":http://forge.ispras.ru/projects/cpptesk-toolkit (hereinafter C++TESK). In addition to C++TESK, "Icarus Verilog":http://iverilog.icarus.com and "VeriTool":http://forge.ispras.ru/projects/veritool (hereinafter Verilog tools) are recommended to be installed (they are used for generating C/C++ API for Verilog modules).

Before installing the toolkit make sure that [[System Requirements]] are met.

h2. Installation

h3. Basic Installation (Recommended)

To install C++TESK, pass the following steps:

# Download the latest version of the C++TESK package (@cpptesk-toolkit-src-<version-number>.tar.gz@) from the "Files":http://forge.ispras.ru/projects/cpptesk-toolkit/files page.

# Unzip the downloaded package:

<pre>

% tar xf cpptesk-toolkit-src-<version-number>.tar.gz

</pre>

# Run the @install.sh@ script as follows.

* To install C++TESK without installing the Verilog tools, run:

<pre>

% install.sh

</pre>

* To install C++TESK together with the Verilog tools (∙) not reinstalling the Verilog tools if they have been already installed, run:

<pre>

% install.sh --install-veritool

</pre>

* To install C++TESK and (re)install the Verilog tools (∙), run:

<pre>

% install.sh --force-install-veritool

</pre> (∙) It should be emphasized that when installing the Verilog tools the script downloads them from the Internet.

Home directories for the tools are chosen according to the following rules:

# If the environment variable @ISPRAS_HOME@ is not set, @ISPRAS_HOME=<user-home-directory>@.

# If the environment variable @CPPTESK_HOME@ is not set, @CPPTESK_HOME=$ISPRAS_HOME/tools/cpptesk-toolkit@.

# If the environment variable @ICARUS_HOME@ is not set, @ICARUS_HOME=$ISPRAS_HOME/tools/verilog@.

# It the environment variable @VERITOOL_HOME@ is not set, @VERITOOL_HOME=$ISPRAS_HOME/tools/veritool@.

C++TESK is installed into the directory @$CPPTESK_HOME@.

"Icarus Verilog":http://iverilog.icarus.com and "VeriTool":http://forge.ispras.ru/projects/veritool (if they are required) are installed into @$ICARUS_HOME@ and @$VERITOOL_HOME@, respectively.

h3. Manual Installation of the Verilog Tools

The Verilog tools can be installed manually (it might be useful if your computer is not connected to the Internet, but ).

To install "Icarus Verilog":http://iverilog.icarus.com, pass the following steps:

# Download the package from "here":http://sourceforge.net/projects/iverilog/files/iverilog.

# If the environment variable @ICARUS_HOME@ is not set, assign an appropriate value:

<pre>

% export ICARUS_HOME=<path-to-icarus-verilog-installation-directory>

% echo "export ICARUS_HOME=$ICARUS_HOME" >> "$HOME/.profile"

% echo "export ICARUS_HOME=$ICARUS_HOME" >> "$HOME/.bashrc"

</pre>

# Create the @$ICARUS_HOME@ directory if it does not exist:

<pre>

% mkdir -p "$ICARUS_HOME"

</pre>

# Unzip the downloaded package and compile the sources:

<pre>

% tar xf verilog-<version-number>.tar.gz

% cd verilog-<version-number>

% ./configure --prefix="$ICARUS_HOME"

% make && make install

</pre>

To install "VeriTool":http://forge.ispras.ru/projects/veritool, pass the following steps:

# Download the package from "here":http://forge.ispras.ru/projects/veritool/files.

# If the environment variable @VERITOOL_HOME@ is not set, assign an appropriate value:

<pre>

% export VERITOOL_HOME=<path-to-veritool-installation-directory>

% echo "export VERITOOL_HOME=$VERITOOL_HOME" >> "$HOME/.profile"

% echo "export VERITOOL_HOME=$VERITOOL_HOME" >> "$HOME/.bashrc"

</pre>

# Create the @$VERITOOL_HOME@ directory if it does not exist:

<pre>

% mkdir -p "$VERITOOL_HOME"

</pre>

# Unzip the downloaded package and compile the sources:

<pre>

% tar xf veritool-<version-number>.tar.gz

% cd veritool-<version-number>

% ./configure --prefix="$VERITOOL_HOME"

% make all && make install

</pre>