Project

General

Profile

Getting Started with x86 » History » Revision 52

Revision 51 (Alexander Protsenko, 04/06/2017 06:02 PM) → Revision 52/87 (Mikhail Chupilko, 04/06/2017 06:05 PM)

h1. Getting Started with x86 

 {{toc}} 

 h2. Prerequisite 

 MicroTESK should be [[Installation Guide|installed]]. 

 h2. Demo Specifications 

 Specifications of the x86 (8086) instruction set architecture (ISA) can be found in "$MICROTESK_HOME/arch/demo/x86/model/x86.nml":http://forge.ispras.ru/projects/microtesk/repository/entry/trunk/microtesk/src/main/arch/demo/x86/model/x86.nml. 

 Instruction are described in [[nML Language Reference|nML]] by means of the following constructs (_mov r16/r16_ is taken as an example): 

 ## the signature 
 <pre><code class="c">op mov_r1616 (dst: GPR16, src: GPR16)</code></pre> 
 ## the assembly format 
 <pre><code class="c">syntax = format("mov %s, %s", dst.syntax, src.syntax)</code></pre> 
 ## the binary encoding 
 <pre><code class="c">image = format("1000101111%s%s", dst.image, src.image)</code></pre> 
 ## the semantics 
 <pre><code class="c"> 
   action = { 
     dst = src; 
     ... 
   } 
 </code></pre> 

 To compile the ISA model, run the following command: 
 <pre>sh $MICROTESK_HOME/bin/compile.sh x86.nml</pre> 

 h2. Demo Templates 

 Test templates for the x86 ISA can be found in "$MICROTESK_HOME/arch/demo/x86/templates":http://forge.ispras.ru/projects/microtesk/repository/entry/trunk/microtesk/src/main/arch/demo/x86/templates. 

 The directory contains a number of demo templates including the following ones: 

 {background:#f6fcff}. | "block.rb":http://forge.ispras.ru/projects/microtesk/repository/entry/trunk/microtesk/src/main/arch/demo/x86/templates/block.rb | demonstrates how to use block constructs | 
                       | "block_random.rb":http://forge.ispras.ru/projects/microtesk/repository/entry/trunk/microtesk/src/main/arch/demo/x86/templates/block_random.rb | demonstrates how to create randomized instruction sequences using block constructs | 
 {background:#f6fcff}. | "euclid.rb":http://forge.ispras.ru/projects/microtesk/repository/entry/trunk/microtesk/src/main/arch/demo/x86/templates/euclid.rb | demonstrates test program simulation to predict the resulting microprocessor state | 
                       | "random.rb":http://forge.ispras.ru/projects/microtesk/repository/entry/trunk/microtesk/src/main/arch/demo/x86/templates/random.rb | demonstrates how to randomize tests by using biases and distributions | 
 {background:#f6fcff}. | "random_immediate.rb":http://forge.ispras.ru/projects/microtesk/repository/entry/trunk/microtesk/src/main/arch/demo/x86/templates/random_immediate.rb | demonstrates how to randomize immediate values | 
                       | "random_registers.rb":http://forge.ispras.ru/projects/microtesk/repository/entry/trunk/microtesk/src/main/arch/demo/x86/templates/random_registers.rb | demonstrates how to randomize registers (dependencies) | 

 Test templates are written in "Ruby":http://www.ruby-lang.org extended with specific [[Template_Description_Language|constructs]]. 

 Let''s review one of the templates ("block.rb":http://forge.ispras.ru/projects/microtesk/repository/entry/trunk/microtesk/src/main/arch/demo/x86/templates/block.rb) in detail. 
 # includes the file where the base class is defined, containing definition of the x86 ISA registers, their preparators, etc. 
 <pre><code class="ruby">require_relative ''x86_base''</code></pre> 
 # declares current template class declaration as a heir of X86BaseTemplate 
 <pre><code class="ruby">class BlockTemplate < X86BaseTemplate</code></pre> 
 # defines a "run" method (also, "initialize", "pre", and "post" methods are declared in the base class, and always inherited) 
 <pre><code class="ruby"> def run</code></pre> 
 # produces a single test case that consists of three instructions 
 <pre><code class="ruby"> 
   sequence { 
     mov_r16r16 ax, bx 
     sub_r16r16 cx, dx 
     add_r16r16 gpr16(_), gpr16(_) 
   }.run 
 </code></pre> 
 # atomic sequence; works as sequence in this context 
 <pre><code class="ruby"> 
   atomic { 
     mov_r16r16 ax, bx 
     add_r16r16 cx, dx 
     sub_r16r16 gpr16(_), gpr16(_) 
   }.run 
 </code></pre> 
 # produces three test cases each consisting of one instruction 
 <pre><code class="ruby"> 
   iterate { 
     mov_r16r16 ax, bx 
     sub_r16r16 cx, dx 
     add_r16r16 gpr16(_), gpr16(_) 
   }.run 
 </code></pre> 
 # produces four test cases consisting of two instructions (Cartesian product composed in a random order) 
 <pre><code class="ruby"> 
   block(:combinator => ''product'', :compositor => ''random'') { 
     iterate { 
       sub_r16r16 cx, dx 
       add_r16r16 ax, bx 
     } 
     iterate { 
       mov_r16r16 ax, bx 
       sub_r16r16 gpr16(_), gpr16(_) 
     } 
   }.run 
 </code></pre> 
 # merges two sequences in random fashion; atomic sequences are unmodifiable 
 <pre><code class="ruby"> 
   block(:combinator => ''diagonal'', :compositor => ''random'', :obfuscator => ''random'') { 
     sequence { 
       sub_r16r16 bx, ax 
       or_r16r16 cx, dx 
     } 

     atomic { 
       prologue { comment ''Atomic starts'' } 
       epilogue { comment ''Atomic ends'' } 

       and_r16r16 gpr16(_), gpr16(_) 
     } 
   }.run 
 </code></pre> 
 # finishes definition of the "run" method and class "BlockTemplate" 
 <pre><code class="ruby"> 
  end 
 end 
 </code></pre> 


 To generate test program(s) from a test template (in our case, from @block.rb@), run the following command: 
 <pre>sh $MICROTESK_HOME/bin/generate.sh x86 block.rb --code-file-prefix block --code-file-extension asm -v</pre> 

 When generation is finished, the resulting assembly code can be found in @$MICROTESK_HOME@. 

 Output file: "block_0000.s":http://forge.ispras.ru/attachments/download/5127/block_0000.s 

 To compile "the output file":http://forge.ispras.ru/attachments/download/5127/block_0000.s, run the following commands: 
 compile:  
 <pre> 
 nasm -f elf block_0000.s 
 ld -m i386pe -s -o block_0000 block_0000.o 
 </pre> 

 To execute resulted test cases is possible by means of the "online simulator":https://www.tutorialspoint.com/compile_assembly_online.php 
 !Example_block.png!