MMU Description¶

_{By Alexander Kamkin and Taya Sergeeva}

• Table of contents
• MMU Description
  • Grammar
  • Address Description (address)
    • Grammar
    • Address Width (width)
      • Grammar
    • Address Space Segment (segment)
      • Grammar
    • Address Format (format)
      • Grammar
  • Examples
  • Buffer Description (buffer)
    • Grammar
    • Buffer Associativity (ways)
      • Grammar
    • Buffer Length (sets)
      • Grammar
    • Buffer Line Format (format)
      • Grammar
    • Buffer Index Function (index)
      • Grammar
    • Buffer Match Predicate (match)
      • Grammar
    • Buffer Data Replacement Policy (policy)
      • Grammar
    • Examples
  • Memory Description (memory)
    • Grammar
    • Memory Read Action (read)
      • Grammar
    • Memory Write Action (write)
      • Grammar
    • Examples

A memory management unit (MMU) is known to be one of the most complex and error-prone components of a modern microprocessor. MicroTESK has a special subsystem, called MMU subsystem, intended for (1) specifying memory devices and (2) deriving testing knowledge from such specifications. The subsystem provides unified facilities for describing memory buffers (like L1 and L2 caches, translation look-aside buffers (TLBs), etc.) as well as a means for connecting several buffers into a memory hierarchy.

Grammar¶

startRule
    : declaration* EOF!
    ;

declaration
    : address
    | segment
    | buffer
    | mmu
    ;

The expression syntax is derived from nML/Sim-nML (see Sim-nML Language Reference).

Address Description (address)¶

A buffer is accessed by an address, which is typically a bit vector of a fixed length (width). Different buffers are allowed to have a common address space (e.g., L1 and L2 are usually both addressed by physical addresses). However, in general case, each buffer has its own domain.

An address space is described using a keyword address. The description can specify two parameters: width (obligatory) and format (optional).

Grammar¶

address
    : ''address'' addressTypeID ''('' expr '')''
    ;

Address Width (width)¶

The width parameter specifies the address width. The parameter is obligatory; its value should be non-negative (zero-length addresses are permitted).

Grammar¶

width
    : ''width'' ''='' expr
    ;

Address Space Segment (segment)¶

The segment parameter specifies the address space segment. Any number (≥ 0) of segments (with different names) can be specified for one address. Each segment is characterized by its name and address range. Different segments should have different names, but address ranges are allowed to overlap, and moreover, to be the same.

Grammar¶

segment
    : ''segment'' segmentID ''='' ''('' expr '','' expr '')''
    ;

Address Format (format)¶

The format parameter specifies the address format (a number of named fields). Any number (≥ 0) of formats (with different names) can be specified for one address.

A field has three attributes: a name, a width and, optionally, an initial value.

Grammar¶

format
    : ''format'' formatID ''='' ''(''
        field ('','' field)*
      '')''
    ;

field
    : ID '':'' expr (''='' expr)?
    ;

Examples¶

// The singleton.
address Void
  // The address width is zero (this is admissible for single-item buffers).
  width = 0

// An unstructured 64-bit virtual addresses (VA).
address VA
  // The address width.
  width = 64

// A stuctured 40-bit physical addresses (PA).
address PA
  // The address width.
  width = 40
  // The address format: (<39..36>, TAG=<35..12>, INDEX=<11..5>, LOCAL=<4..0>).
  format PA_L1 = (
    TAG   : 24, // The tag (the <35..12> address bits).
    INDEX : 7,  // The set index (the <11..5> address bits).
    LOCAL : 5,  // The byte position (the <0..4> address bits).
  )

Buffer Description (buffer)¶

A buffer is described using a keyword buffer. The description specifies a set of parameters, including ways, sets, format, index, match and policy. All of the parameters except index (if sets = 1) and policy are obligatory.

Grammar¶

buffer
    : ''buffer'' bufferTypeID ''('' addressTypeID addressArgID '')''
        (bufferParameter)*
    ;

bufferParameter
    : ways
    | sets
    | format
    | index
    | match
    | policy
    ;

Buffer Associativity (ways)¶

The ways parameter specifies the buffer associativity (the number of lines in a set). The parameter is obligatory; its value should be positive.

Grammar¶

ways
    : ''ways'' ''='' expr
    ;

Buffer Length (sets)¶

The sets parameter specifies the buffer length (the number of sets a cache). The parameter is obligatory; its value should be positive.

Grammar¶

sets
    : ''sets'' ''='' expr
    ;

Buffer Line Format (format)¶

The format parameter specifies the buffer line format (a number of named fields). Any number (≥ 0) of formats (with different names) can be specified for one buffer.

A field has three attributes: a name, a width and, optionally, an initial value.

Grammar¶

format
    : ''format'' formatID ''='' ''('' field ('','' field)* '')''
    ;

field
    : fieldID '':'' expr (''='' expr)?
    ;

Buffer Index Function (index)¶

The index parameter specifies the address-to-index function, which maps an address into the set index. The function may be omitted if the number of sets is 1.

Grammar¶

index
    : ''index'' ''='' expr
    ;

Buffer Match Predicate (match)¶

The match parameter specifies the address-line match predicate, which checks if an address matches a line. The parameter is obligatory.

Grammar¶

index
    : ''match'' ''='' expr
    ;

Buffer Data Replacement Policy (policy)¶

The policy parameters specifies the data replacement (eviction) policy. The parameter is optional. The list of supported policies includes: RANDOM, FIFO, PLRU and LRU.

Grammar¶

policy
    : ''policy'' ''='' policyID
    ;

Examples¶

// A 4-way set associative cache (L1) addressed by physical addresses (PA).
buffer L1(PA addr)
  // The cache associativity.
  ways = 4
  // The number of sets.
  sets = 128
  // The line format.
  format LINE = (
    V    : 1 = 0, // The validity flag (by default, the line is invalid).
    TAG  : 24,    // The tag (the <35..12> address bits).
    DATA : 256    // The data (4 double words).
  )
  // The address-to-index function (example: using address fields).
  index = addr.INDEX
  // The address-line predicate (example: using address bits).
  match = addr<35..12> == LINE.TAG
  // The data replacement policy (example: using predefined policy LRU - Least Recently Used).
  policy = LRU

Memory Description (memory)¶

A memory is described using a keyword memory. The description includes two obligatory parameters read and write.

Grammar¶

memory
    : ''memory'' memoryTypeID ''('' addressTypeID addressArgID '')''
        (memoryParameter)*
    ;

memoryParameter
    : read
    | write
    ;

Memory Read Action (read)¶

The read parameter specifies the read action, which is a sequence of statements describing how the read operation is to be performed (by means of data transfers between buffers). The parameter is obligatory.

Grammar¶

read
    : ''read'' ''='' ''{'' sequence ''}''
    ;

Memory Write Action (write)¶

The write parameter specifies the read action, which is a sequence of statements describing how the write operation is to be performed (by means of data transfers between buffers). The parameter is obligatory.

Grammar¶

write
    : ''write'' ''='' ''{'' sequence ''}''
    ;

Examples¶

// A memory unit addressed by virtual addresses (VA).
memory Memory(VA addr)
  // The read action.
  read = {
    // Some statements.
    ...
  }
  // The write action.
  write = {
    // Some statements.
    ...
  }