|
|
|
/*
|
|
* usblp.c
|
|
*
|
|
* Copyright (c) 1999 Michael Gee <michael@linuxspecific.com>
|
|
* Copyright (c) 1999 Pavel Machek <pavel@suse.cz>
|
|
* Copyright (c) 2000 Randy Dunlap <rdunlap@xenotime.net>
|
|
* Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz>
|
|
# Copyright (c) 2001 Pete Zaitcev <zaitcev@redhat.com>
|
|
# Copyright (c) 2001 David Paschal <paschal@rcsis.com>
|
|
* Copyright (c) 2006 Oliver Neukum <oliver@neukum.name>
|
|
*
|
|
* USB Printer Device Class driver for USB printers and printer cables
|
|
*
|
|
* Sponsored by SuSE
|
|
*
|
|
* ChangeLog:
|
|
* v0.1 - thorough cleaning, URBification, almost a rewrite
|
|
* v0.2 - some more cleanups
|
|
* v0.3 - cleaner again, waitqueue fixes
|
|
* v0.4 - fixes in unidirectional mode
|
|
* v0.5 - add DEVICE_ID string support
|
|
* v0.6 - never time out
|
|
* v0.7 - fixed bulk-IN read and poll (David Paschal)
|
|
* v0.8 - add devfs support
|
|
* v0.9 - fix unplug-while-open paths
|
|
* v0.10- remove sleep_on, fix error on oom (oliver@neukum.org)
|
|
* v0.11 - add proto_bias option (Pete Zaitcev)
|
|
* v0.12 - add hpoj.sourceforge.net ioctls (David Paschal)
|
|
* v0.13 - alloc space for statusbuf (<status> not on stack);
|
|
* use usb_buffer_alloc() for read buf & write buf;
|
|
* none - Maintained in Linux kernel after v0.13
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/lp.h>
|
|
#include <linux/mutex.h>
|
|
#undef DEBUG
|
|
#include <linux/usb.h>
|
|
|
|
/*
|
|
* Version Information
|
|
*/
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
|
|
/* ioctls: */
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
/* Get device_id string: */
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
/* The following ioctls were added for http://hpoj.sourceforge.net: */
|
|
/* Get two-int array:
|
|
* [0]=current protocol (1=7/1/1, 2=7/1/2, 3=7/1/3),
|
|
* [1]=supported protocol mask (mask&(1<<n)!=0 means 7/1/n supported): */
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
/* Set protocol (arg: 1=7/1/1, 2=7/1/2, 3=7/1/3): */
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
/* Set channel number (HP Vendor-specific command): */
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
/* Get two-int array: [0]=bus number, [1]=device address: */
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
/* Get two-int array: [0]=vendor ID, [1]=product ID: */
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
/* Perform class specific soft reset */
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
|
|
/*
|
|
* A DEVICE_ID string may include the printer's serial number.
|
|
* It should end with a semi-colon (';').
|
|
* An example from an HP 970C DeskJet printer is (this is one long string,
|
|
* with the serial number changed):
|
|
MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hewlett-Packard DeskJet 970C;SERN:US970CSEPROF;VSTATUS:$HB0$NC0,ff,DN,IDLE,CUT,K1,C0,DP,NR,KP000,CP027;VP:0800,FL,B0;VJ: ;
|
|
*/
|
|
|
|
/*
|
|
* USB Printer Requests
|
|
*/
|
|
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00 /* HP Vendor-specific */
|
|
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
|
|
#define USBLP_CTL_TIMEOUT 5000 /* 5 seconds */
|
|
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
|
|
/*
|
|
* some arbitrary status buffer size;
|
|
* need a status buffer that is allocated via kmalloc(), not on stack
|
|
*/
|
|
#define STATUS_BUF_SIZE 8
|
|
|
|
/*
|
|
* Locks down the locking order:
|
|
* ->wmut locks wstatus.
|
|
* ->mut locks the whole usblp, except [rw]complete, and thus, by indirection,
|
|
* [rw]status. We only touch status when we know the side idle.
|
|
* ->lock locks what interrupt accesses.
|
|
*/
|
|
struct usblp {
|
|
struct usb_device *dev; /* USB device */
|
|
struct mutex wmut;
|
|
struct mutex mut;
|
|
spinlock_t lock; /* locks rcomplete, wcomplete */
|
|
char *readbuf; /* read transfer_buffer */
|
|
char *statusbuf; /* status transfer_buffer */
|
|
struct usb_anchor urbs;
|
|
wait_queue_head_t rwait, wwait;
|
|
int readcount; /* Counter for reads */
|
|
int ifnum; /* Interface number */
|
|
struct usb_interface *intf; /* The interface */
|
|
/* Alternate-setting numbers and endpoints for each protocol
|
|
* (7/1/{index=1,2,3}) that the device supports: */
|
|
struct {
|
|
int alt_setting;
|
|
struct usb_endpoint_descriptor *epwrite;
|
|
struct usb_endpoint_descriptor *epread;
|
|
} protocol[USBLP_MAX_PROTOCOLS];
|
|
int current_protocol;
|
|
int minor; /* minor number of device */
|
|
int wcomplete, rcomplete;
|
|
int wstatus; /* bytes written or error */
|
|
int rstatus; /* bytes ready or error */
|
|
unsigned int quirks; /* quirks flags */
|
|
unsigned int flags; /* mode flags */
|
|
unsigned char used; /* True if open */
|
|
unsigned char present; /* True if not disconnected */
|
|
unsigned char bidir; /* interface is bidirectional */
|
|
unsigned char sleeping; /* interface is suspended */
|
|
unsigned char no_paper; /* Paper Out happened */
|
|
unsigned char *device_id_string; /* IEEE 1284 DEVICE ID string (ptr) */
|
|
/* first 2 bytes are (big-endian) length */
|
|
};
|
|
|
|
#ifdef DEBUG
|
|
static void usblp_dump(struct usblp *usblp) {
|
|
int p;
|
|
|
|
dbg("usblp=0x%p", usblp);
|
|
dbg("dev=0x%p", usblp->dev);
|
|
dbg("present=%d", usblp->present);
|
|
dbg("readbuf=0x%p", usblp->readbuf);
|
|
dbg("readcount=%d", usblp->readcount);
|
|
dbg("ifnum=%d", usblp->ifnum);
|
|
for (p = USBLP_FIRST_PROTOCOL; p <= USBLP_LAST_PROTOCOL; p++) {
|
|
dbg("protocol[%d].alt_setting=%d", p, usblp->protocol[p].alt_setting);
|
|
dbg("protocol[%d].epwrite=%p", p, usblp->protocol[p].epwrite);
|
|
dbg("protocol[%d].epread=%p", p, usblp->protocol[p].epread);
|
|
}
|
|
dbg("current_protocol=%d", usblp->current_protocol);
|
|
dbg("minor=%d", usblp->minor);
|
|
dbg("wstatus=%d", usblp->wstatus);
|
|
dbg("rstatus=%d", usblp->rstatus);
|
|
dbg("quirks=%d", usblp->quirks);
|
|
dbg("used=%d", usblp->used);
|
|
dbg("bidir=%d", usblp->bidir);
|
|
dbg("sleeping=%d", usblp->sleeping);
|
|
dbg("device_id_string=\"%s\"",
|
|
usblp->device_id_string ?
|
|
usblp->device_id_string + 2 :
|
|
(unsigned char *)"(null)");
|
|
}
|
|
#endif
|
|
|
|
/* Quirks: various printer quirks are handled by this table & its flags. */
|
|
|
|
struct quirk_printer_struct {
|
|
__u16 vendorId;
|
|
__u16 productId;
|
|
unsigned int quirks;
|
|
};
|
|
|
|
#define USBLP_QUIRK_BIDIR 0x1 /* reports bidir but requires unidirectional mode (no INs/reads) */
|
|
#define USBLP_QUIRK_USB_INIT 0x2 /* needs vendor USB init string */
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4 /* descriptor uses vendor-specific Class or SubClass */
|
|
|
|
static const struct quirk_printer_struct quirk_printers[] = {
|
|
{ 0x03f0, 0x0004, USBLP_QUIRK_BIDIR }, /* HP DeskJet 895C */
|
|
{ 0x03f0, 0x0104, USBLP_QUIRK_BIDIR }, /* HP DeskJet 880C */
|
|
{ 0x03f0, 0x0204, USBLP_QUIRK_BIDIR }, /* HP DeskJet 815C */
|
|
{ 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */
|
|
{ 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */
|
|
{ 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */
|
|
{ 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */
|
|
{ 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */
|
|
{ 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */
|
|
{ 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */
|
|
{ 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */
|
|
{ 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
|
|
{ 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
|
|
{ 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
|
|
{ 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
|
|
{ 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static int usblp_wwait(struct usblp *usblp, int nonblock);
|
|
static int usblp_wtest(struct usblp *usblp, int nonblock);
|
|
static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock);
|
|
static int usblp_rtest(struct usblp *usblp, int nonblock);
|
|
static int usblp_submit_read(struct usblp *usblp);
|
|
static int usblp_select_alts(struct usblp *usblp);
|
|
static int usblp_set_protocol(struct usblp *usblp, int protocol);
|
|
static int usblp_cache_device_id_string(struct usblp *usblp);
|
|
|
|
/* forward reference to make our lives easier */
|
|
static struct usb_driver usblp_driver;
|
|
static DEFINE_MUTEX(usblp_mutex); /* locks the existence of usblp's */
|
|
|
|
/*
|
|
* Functions for usblp control messages.
|
|
*/
|
|
|
|
static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, int recip, int value, void *buf, int len)
|
|
{
|
|
int retval;
|
|
int index = usblp->ifnum;
|
|
|
|
/* High byte has the interface index.
|
|
Low byte has the alternate setting.
|
|
*/
|
|
if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) {
|
|
index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting;
|
|
}
|
|
|
|
retval = usb_control_msg(usblp->dev,
|
|
dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0),
|
|
request, type | dir | recip, value, index, buf, len, USBLP_CTL_TIMEOUT);
|
|
dbg("usblp_control_msg: rq: 0x%02x dir: %d recip: %d value: %d idx: %d len: %#x result: %d",
|
|
request, !!dir, recip, value, index, len, retval);
|
|
return retval < 0 ? retval : 0;
|
|
}
|
|
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
|
|
/*
|
|
* See the description for usblp_select_alts() below for the usage
|
|
* explanation. Look into your /proc/bus/usb/devices and dmesg in
|
|
* case of any trouble.
|
|
*/
|
|
static int proto_bias = -1;
|
|
|
|
/*
|
|
* URB callback.
|
|
*/
|
|
|
|
static void usblp_bulk_read(struct urb *urb)
|
|
{
|
|
struct usblp *usblp = urb->context;
|
|
int status = urb->status;
|
|
|
|
if (usblp->present && usblp->used) {
|
|
if (status)
|
|
printk(KERN_WARNING "usblp%d: "
|
|
"nonzero read bulk status received: %d\n",
|
|
usblp->minor, status);
|
|
}
|
|
spin_lock(&usblp->lock);
|
|
if (status < 0)
|
|
usblp->rstatus = status;
|
|
else
|
|
usblp->rstatus = urb->actual_length;
|
|
usblp->rcomplete = 1;
|
|
wake_up(&usblp->rwait);
|
|
spin_unlock(&usblp->lock);
|
|
|
|
usb_free_urb(urb);
|
|
}
|
|
|
|
static void usblp_bulk_write(struct urb *urb)
|
|
{
|
|
struct usblp *usblp = urb->context;
|
|
int status = urb->status;
|
|
|
|
if (usblp->present && usblp->used) {
|
|
if (status)
|
|
printk(KERN_WARNING "usblp%d: "
|
|
"nonzero write bulk status received: %d\n",
|
|
usblp->minor, status);
|
|
}
|
|
spin_lock(&usblp->lock);
|
|
if (status < 0)
|
|
usblp->wstatus = status;
|
|
else
|
|
usblp->wstatus = urb->actual_length;
|
|
usblp->no_paper = 0;
|
|
usblp->wcomplete = 1;
|
|
wake_up(&usblp->wwait);
|
|
spin_unlock(&usblp->lock);
|
|
|
|
usb_free_urb(urb);
|
|
}
|
|
|
|
/*
|
|
* Get and print printer errors.
|
|
*/
|
|
|
|
static const char *usblp_messages[] = { "ok", "out of paper", "off-line", "on fire" };
|
|
|
|
static int usblp_check_status(struct usblp *usblp, int err)
|
|
{
|
|
unsigned char status, newerr = 0;
|
|
int error;
|
|
|
|
mutex_lock(&usblp->mut);
|
|
if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
|
|
mutex_unlock(&usblp->mut);
|
|
if (printk_ratelimit())
|
|
printk(KERN_ERR
|
|
"usblp%d: error %d reading printer status\n",
|
|
usblp->minor, error);
|
|
return 0;
|
|
}
|
|
status = *usblp->statusbuf;
|
|
mutex_unlock(&usblp->mut);
|
|
|
|
if (~status & LP_PERRORP)
|
|
newerr = 3;
|
|
if (status & LP_POUTPA)
|
|
newerr = 1;
|
|
if (~status & LP_PSELECD)
|
|
newerr = 2;
|
|
|
|
if (newerr != err) {
|
|
printk(KERN_INFO "usblp%d: %s\n",
|
|
usblp->minor, usblp_messages[newerr]);
|
|
}
|
|
|
|
return newerr;
|
|
}
|
|
|
|
static int handle_bidir (struct usblp *usblp)
|
|
{
|
|
if (usblp->bidir && usblp->used && !usblp->sleeping) {
|
|
if (usblp_submit_read(usblp) < 0)
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* File op functions.
|
|
*/
|
|
|
|
static int usblp_open(struct inode *inode, struct file *file)
|
|
{
|
|
int minor = iminor(inode);
|
|
struct usblp *usblp;
|
|
struct usb_interface *intf;
|
|
int retval;
|
|
|
|
if (minor < 0)
|
|
return -ENODEV;
|
|
|
|
mutex_lock (&usblp_mutex);
|
|
|
|
retval = -ENODEV;
|
|
intf = usb_find_interface(&usblp_driver, minor);
|
|
if (!intf) {
|
|
goto out;
|
|
}
|
|
usblp = usb_get_intfdata (intf);
|
|
if (!usblp || !usblp->dev || !usblp->present)
|
|
goto out;
|
|
|
|
retval = -EBUSY;
|
|
if (usblp->used)
|
|
goto out;
|
|
|
|
/*
|
|
* We do not implement LP_ABORTOPEN/LPABORTOPEN for two reasons:
|
|
* - We do not want persistent state which close(2) does not clear
|
|
* - It is not used anyway, according to CUPS people
|
|
*/
|
|
|
|
retval = usb_autopm_get_interface(intf);
|
|
if (retval < 0)
|
|
goto out;
|
|
usblp->used = 1;
|
|
file->private_data = usblp;
|
|
|
|
usblp->wcomplete = 1; /* we begin writeable */
|
|
usblp->wstatus = 0;
|
|
usblp->rcomplete = 0;
|
|
|
|
if (handle_bidir(usblp) < 0) {
|
|
usb_autopm_put_interface(intf);
|
|
usblp->used = 0;
|
|
file->private_data = NULL;
|
|
retval = -EIO;
|
|
}
|
|
out:
|
|
mutex_unlock (&usblp_mutex);
|
|
return retval;
|
|
}
|
|
|
|
static void usblp_cleanup (struct usblp *usblp)
|
|
{
|
|
printk(KERN_INFO "usblp%d: removed\n", usblp->minor);
|
|
|
|
kfree(usblp->readbuf);
|
|
kfree (usblp->device_id_string);
|
|
kfree (usblp->statusbuf);
|
|
kfree (usblp);
|
|
}
|
|
|
|
static void usblp_unlink_urbs(struct usblp *usblp)
|
|
{
|
|
usb_kill_anchored_urbs(&usblp->urbs);
|
|
}
|
|
|
|
static int usblp_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct usblp *usblp = file->private_data;
|
|
|
|
usblp->flags &= ~LP_ABORT;
|
|
|
|
mutex_lock (&usblp_mutex);
|
|
usblp->used = 0;
|
|
if (usblp->present) {
|
|
usblp_unlink_urbs(usblp);
|
|
usb_autopm_put_interface(usblp->intf);
|
|
} else /* finish cleanup from disconnect */
|
|
usblp_cleanup (usblp);
|
|
mutex_unlock (&usblp_mutex);
|
|
return 0;
|
|
}
|
|
|
|
/* No kernel lock - fine */
|
|
static unsigned int usblp_poll(struct file *file, struct poll_table_struct *wait)
|
|
{
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
struct usblp *usblp = file->private_data;
|
|
/* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */
|
|
poll_wait(file, &usblp->rwait, wait);
|
|
poll_wait(file, &usblp->wwait, wait);
|
|
spin_lock_irqsave(&usblp->lock, flags);
|
|
ret = ((usblp->bidir && usblp->rcomplete) ? POLLIN | POLLRDNORM : 0) |
|
|
((usblp->no_paper || usblp->wcomplete) ? POLLOUT | POLLWRNORM : 0);
|
|
spin_unlock_irqrestore(&usblp->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct usblp *usblp = file->private_data;
|
|
int length, err, i;
|
|
unsigned char newChannel;
|
|
int status;
|
|
int twoints[2];
|
|
int retval = 0;
|
|
|
|
mutex_lock (&usblp->mut);
|
|
if (!usblp->present) {
|
|
retval = -ENODEV;
|
|
goto done;
|
|
}
|
|
|
|
if (usblp->sleeping) {
|
|
retval = -ENODEV;
|
|
goto done;
|
|
}
|
|
|
|
dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd),
|
|
_IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd) );
|
|
|
|
if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */
|
|
|
|
switch (_IOC_NR(cmd)) {
|
|
|
|
case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
|
|
if (_IOC_DIR(cmd) != _IOC_READ) {
|
|
retval = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
length = usblp_cache_device_id_string(usblp);
|
|
if (length < 0) {
|
|
retval = length;
|
|
goto done;
|
|
}
|
|
if (length > _IOC_SIZE(cmd))
|
|
length = _IOC_SIZE(cmd); /* truncate */
|
|
|
|
if (copy_to_user((void __user *) arg,
|
|
usblp->device_id_string,
|
|
(unsigned long) length)) {
|
|
retval = -EFAULT;
|
|
goto done;
|
|
}
|
|
|
|
break;
|
|
|
|
case IOCNR_GET_PROTOCOLS:
|
|
if (_IOC_DIR(cmd) != _IOC_READ ||
|
|
_IOC_SIZE(cmd) < sizeof(twoints)) {
|
|
retval = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
twoints[0] = usblp->current_protocol;
|
|
twoints[1] = 0;
|
|
for (i = USBLP_FIRST_PROTOCOL;
|
|
i <= USBLP_LAST_PROTOCOL; i++) {
|
|
if (usblp->protocol[i].alt_setting >= 0)
|
|
twoints[1] |= (1<<i);
|
|
}
|
|
|
|
if (copy_to_user((void __user *)arg,
|
|
(unsigned char *)twoints,
|
|
sizeof(twoints))) {
|
|
retval = -EFAULT;
|
|
goto done;
|
|
}
|
|
|
|
break;
|
|
|
|
case IOCNR_SET_PROTOCOL:
|
|
if (_IOC_DIR(cmd) != _IOC_WRITE) {
|
|
retval = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
if (arg == -10) {
|
|
usblp_dump(usblp);
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
usblp_unlink_urbs(usblp);
|
|
retval = usblp_set_protocol(usblp, arg);
|
|
if (retval < 0) {
|
|
usblp_set_protocol(usblp,
|
|
usblp->current_protocol);
|
|
}
|
|
break;
|
|
|
|
case IOCNR_HP_SET_CHANNEL:
|
|
if (_IOC_DIR(cmd) != _IOC_WRITE ||
|
|
le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 ||
|
|
usblp->quirks & USBLP_QUIRK_BIDIR) {
|
|
retval = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
err = usblp_hp_channel_change_request(usblp,
|
|
arg, &newChannel);
|
|
if (err < 0) {
|
|
dev_err(&usblp->dev->dev,
|
|
"usblp%d: error = %d setting "
|
|
"HP channel\n",
|
|
usblp->minor, err);
|
|
retval = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
dbg("usblp%d requested/got HP channel %ld/%d",
|
|
usblp->minor, arg, newChannel);
|
|
break;
|
|
|
|
case IOCNR_GET_BUS_ADDRESS:
|
|
if (_IOC_DIR(cmd) != _IOC_READ ||
|
|
_IOC_SIZE(cmd) < sizeof(twoints)) {
|
|
retval = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
twoints[0] = usblp->dev->bus->busnum;
|
|
twoints[1] = usblp->dev->devnum;
|
|
if (copy_to_user((void __user *)arg,
|
|
(unsigned char *)twoints,
|
|
sizeof(twoints))) {
|
|
retval = -EFAULT;
|
|
goto done;
|
|
}
|
|
|
|
dbg("usblp%d is bus=%d, device=%d",
|
|
usblp->minor, twoints[0], twoints[1]);
|
|
break;
|
|
|
|
case IOCNR_GET_VID_PID:
|
|
if (_IOC_DIR(cmd) != _IOC_READ ||
|
|
_IOC_SIZE(cmd) < sizeof(twoints)) {
|
|
retval = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor);
|
|
twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct);
|
|
if (copy_to_user((void __user *)arg,
|
|
(unsigned char *)twoints,
|
|
sizeof(twoints))) {
|
|
retval = -EFAULT;
|
|
goto done;
|
|
}
|
|
|
|
dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X",
|
|
usblp->minor, twoints[0], twoints[1]);
|
|
break;
|
|
|
|
case IOCNR_SOFT_RESET:
|
|
if (_IOC_DIR(cmd) != _IOC_NONE) {
|
|
retval = -EINVAL;
|
|
goto done;
|
|
}
|
|
retval = usblp_reset(usblp);
|
|
break;
|
|
default:
|
|
retval = -ENOTTY;
|
|
}
|
|
else /* old-style ioctl value */
|
|
switch (cmd) {
|
|
|
|
case LPGETSTATUS:
|
|
if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
|
|
if (printk_ratelimit())
|
|
printk(KERN_ERR "usblp%d:"
|
|
"failed reading printer status (%d)\n",
|
|
usblp->minor, retval);
|
|
retval = -EIO;
|
|
goto done;
|
|
}
|
|
status = *usblp->statusbuf;
|
|
if (copy_to_user ((void __user *)arg, &status, sizeof(int)))
|
|
retval = -EFAULT;
|
|
break;
|
|
|
|
case LPABORT:
|
|
if (arg)
|
|
usblp->flags |= LP_ABORT;
|
|
else
|
|
usblp->flags &= ~LP_ABORT;
|
|
break;
|
|
|
|
default:
|
|
retval = -ENOTTY;
|
|
}
|
|
|
|
done:
|
|
mutex_unlock (&usblp->mut);
|
|
return retval;
|
|
}
|
|
|
|
static struct urb *usblp_new_writeurb(struct usblp *usblp, int transfer_length)
|
|
{
|
|
struct urb *urb;
|
|
char *writebuf;
|
|
|
|
if ((writebuf = kmalloc(transfer_length, GFP_KERNEL)) == NULL)
|
|
return NULL;
|
|
if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL) {
|
|
kfree(writebuf);
|
|
return NULL;
|
|
}
|
|
|
|
usb_fill_bulk_urb(urb, usblp->dev,
|
|
usb_sndbulkpipe(usblp->dev,
|
|
usblp->protocol[usblp->current_protocol].epwrite->bEndpointAddress),
|
|
writebuf, transfer_length, usblp_bulk_write, usblp);
|
|
urb->transfer_flags |= URB_FREE_BUFFER;
|
|
|
|
return urb;
|
|
}
|
|
|
|
static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
|
|
{
|
|
struct usblp *usblp = file->private_data;
|
|
struct urb *writeurb;
|
|
int rv;
|
|
int transfer_length;
|
|
ssize_t writecount = 0;
|
|
|
|
if (mutex_lock_interruptible(&usblp->wmut)) {
|
|
rv = -EINTR;
|
|
goto raise_biglock;
|
|
}
|
|
if ((rv = usblp_wwait(usblp, !!(file->f_flags & O_NONBLOCK))) < 0)
|
|
goto raise_wait;
|
|
|
|
while (writecount < count) {
|
|
/*
|
|
* Step 1: Submit next block.
|
|
*/
|
|
if ((transfer_length = count - writecount) > USBLP_BUF_SIZE)
|
|
transfer_length = USBLP_BUF_SIZE;
|
|
|
|
rv = -ENOMEM;
|
|
if ((writeurb = usblp_new_writeurb(usblp, transfer_length)) == NULL)
|
|
goto raise_urb;
|
|
usb_anchor_urb(writeurb, &usblp->urbs);
|
|
|
|
if (copy_from_user(writeurb->transfer_buffer,
|
|
buffer + writecount, transfer_length)) {
|
|
rv = -EFAULT;
|
|
goto raise_badaddr;
|
|
}
|
|
|
|
spin_lock_irq(&usblp->lock);
|
|
usblp->wcomplete = 0;
|
|
spin_unlock_irq(&usblp->lock);
|
|
if ((rv = usb_submit_urb(writeurb, GFP_KERNEL)) < 0) {
|
|
usblp->wstatus = 0;
|
|
spin_lock_irq(&usblp->lock);
|
|
usblp->no_paper = 0;
|
|
usblp->wcomplete = 1;
|
|
wake_up(&usblp->wwait);
|
|
spin_unlock_irq(&usblp->lock);
|
|
if (rv != -ENOMEM)
|
|
rv = -EIO;
|
|
goto raise_submit;
|
|
}
|
|
|
|
/*
|
|
* Step 2: Wait for transfer to end, collect results.
|
|
*/
|
|
rv = usblp_wwait(usblp, !!(file->f_flags&O_NONBLOCK));
|
|
if (rv < 0) {
|
|
if (rv == -EAGAIN) {
|
|
/* Presume that it's going to complete well. */
|
|
writecount += transfer_length;
|
|
}
|
|
if (rv == -ENOSPC) {
|
|
spin_lock_irq(&usblp->lock);
|
|
usblp->no_paper = 1; /* Mark for poll(2) */
|
|
spin_unlock_irq(&usblp->lock);
|
|
writecount += transfer_length;
|
|
}
|
|
/* Leave URB dangling, to be cleaned on close. */
|
|
goto collect_error;
|
|
}
|
|
|
|
if (usblp->wstatus < 0) {
|
|
rv = -EIO;
|
|
goto collect_error;
|
|
}
|
|
/*
|
|
* This is critical: it must be our URB, not other writer's.
|
|
* The wmut exists mainly to cover us here.
|
|
*/
|
|
writecount += usblp->wstatus;
|
|
}
|
|
|
|
mutex_unlock(&usblp->wmut);
|
|
return writecount;
|
|
|
|
raise_submit:
|
|
raise_badaddr:
|
|
usb_unanchor_urb(writeurb);
|
|
usb_free_urb(writeurb);
|
|
raise_urb:
|
|
raise_wait:
|
|
collect_error: /* Out of raise sequence */
|
|
mutex_unlock(&usblp->wmut);
|
|
raise_biglock:
|
|
return writecount ? writecount : rv;
|
|
}
|
|
|
|
/*
|
|
* Notice that we fail to restart in a few cases: on EFAULT, on restart
|
|
* error, etc. This is the historical behaviour. In all such cases we return
|
|
* EIO, and applications loop in order to get the new read going.
|
|
*/
|
|
static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos)
|
|
{
|
|
struct usblp *usblp = file->private_data;
|
|
ssize_t count;
|
|
ssize_t avail;
|
|
int rv;
|
|
|
|
if (!usblp->bidir)
|
|
return -EINVAL;
|
|
|
|
rv = usblp_rwait_and_lock(usblp, !!(file->f_flags & O_NONBLOCK));
|
|
if (rv < 0)
|
|
return rv;
|
|
|
|
if ((avail = usblp->rstatus) < 0) {
|
|
printk(KERN_ERR "usblp%d: error %d reading from printer\n",
|
|
usblp->minor, (int)avail);
|
|
usblp_submit_read(usblp);
|
|
count = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
count = len < avail - usblp->readcount ? len : avail - usblp->readcount;
|
|
if (count != 0 &&
|
|
copy_to_user(buffer, usblp->readbuf + usblp->readcount, count)) {
|
|
count = -EFAULT;
|
|
goto done;
|
|
}
|
|
|
|
if ((usblp->readcount += count) == avail) {
|
|
if (usblp_submit_read(usblp) < 0) {
|
|
/* We don't want to leak USB return codes into errno. */
|
|
if (count == 0)
|
|
count = -EIO;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
done:
|
|
mutex_unlock (&usblp->mut);
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* Wait for the write path to come idle.
|
|
* This is called under the ->wmut, so the idle path stays idle.
|
|
*
|
|
* Our write path has a peculiar property: it does not buffer like a tty,
|
|
* but waits for the write to succeed. This allows our ->release to bug out
|
|
* without waiting for writes to drain. But it obviously does not work
|
|
* when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use
|
|
* select(2) or poll(2) to wait for the buffer to drain before closing.
|
|
* Alternatively, set blocking mode with fcntl and issue a zero-size write.
|
|
*/
|
|
static int usblp_wwait(struct usblp *usblp, int nonblock)
|
|
{
|
|
DECLARE_WAITQUEUE(waita, current);
|
|
int rc;
|
|
int err = 0;
|
|
|
|
add_wait_queue(&usblp->wwait, &waita);
|
|
for (;;) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
if (mutex_lock_interruptible(&usblp->mut)) {
|
|
rc = -EINTR;
|
|
break;
|
|
}
|
|
rc = usblp_wtest(usblp, nonblock);
|
|
mutex_unlock(&usblp->mut);
|
|
if (rc <= 0)
|
|
break;
|
|
|
|
if (schedule_timeout(msecs_to_jiffies(1500)) == 0) {
|
|
if (usblp->flags & LP_ABORT) {
|
|
err = usblp_check_status(usblp, err);
|
|
if (err == 1) { /* Paper out */
|
|
rc = -ENOSPC;
|
|
break;
|
|
}
|
|
} else {
|
|
/* Prod the printer, Gentoo#251237. */
|
|
mutex_lock(&usblp->mut);
|
|
usblp_read_status(usblp, usblp->statusbuf);
|
|
mutex_unlock(&usblp->mut);
|
|
}
|
|
}
|
|
}
|
|
set_current_state(TASK_RUNNING);
|
|
remove_wait_queue(&usblp->wwait, &waita);
|
|
return rc;
|
|
}
|
|
|
|
static int usblp_wtest(struct usblp *usblp, int nonblock)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (!usblp->present)
|
|
return -ENODEV;
|
|
if (signal_pending(current))
|
|
return -EINTR;
|
|
spin_lock_irqsave(&usblp->lock, flags);
|
|
if (usblp->wcomplete) {
|
|
spin_unlock_irqrestore(&usblp->lock, flags);
|
|
return 0;
|
|
}
|
|
spin_unlock_irqrestore(&usblp->lock, flags);
|
|
if (usblp->sleeping)
|
|
return -ENODEV;
|
|
if (nonblock)
|
|
return -EAGAIN;
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Wait for read bytes to become available. This probably should have been
|
|
* called usblp_r_lock_and_wait(), because we lock first. But it's a traditional
|
|
* name for functions which lock and return.
|
|
*
|
|
* We do not use wait_event_interruptible because it makes locking iffy.
|
|
*/
|
|
static int usblp_rwait_and_lock(struct usblp *usblp, int nonblock)
|
|
{
|
|
DECLARE_WAITQUEUE(waita, current);
|
|
int rc;
|
|
|
|
add_wait_queue(&usblp->rwait, &waita);
|
|
for (;;) {
|
|
if (mutex_lock_interruptible(&usblp->mut)) {
|
|
rc = -EINTR;
|
|
break;
|
|
}
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
if ((rc = usblp_rtest(usblp, nonblock)) < 0) {
|
|
mutex_unlock(&usblp->mut);
|
|
break;
|
|
}
|
|
if (rc == 0) /* Keep it locked */
|
|
break;
|
|
mutex_unlock(&usblp->mut);
|
|
schedule();
|
|
}
|
|
set_current_state(TASK_RUNNING);
|
|
remove_wait_queue(&usblp->rwait, &waita);
|
|
return rc;
|
|
}
|
|
|
|
static int usblp_rtest(struct usblp *usblp, int nonblock)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (!usblp->present)
|
|
return -ENODEV;
|
|
if (signal_pending(current))
|
|
return -EINTR;
|
|
spin_lock_irqsave(&usblp->lock, flags);
|
|
if (usblp->rcomplete) {
|
|
spin_unlock_irqrestore(&usblp->lock, flags);
|
|
return 0;
|
|
}
|
|
spin_unlock_irqrestore(&usblp->lock, flags);
|
|
if (usblp->sleeping)
|
|
return -ENODEV;
|
|
if (nonblock)
|
|
return -EAGAIN;
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Please check ->bidir and other such things outside for now.
|
|
*/
|
|
static int usblp_submit_read(struct usblp *usblp)
|
|
{
|
|
struct urb *urb;
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
rc = -ENOMEM;
|
|
if ((urb = usb_alloc_urb(0, GFP_KERNEL)) == NULL)
|
|
goto raise_urb;
|
|
|
|
usb_fill_bulk_urb(urb, usblp->dev,
|
|
usb_rcvbulkpipe(usblp->dev,
|
|
usblp->protocol[usblp->current_protocol].epread->bEndpointAddress),
|
|
usblp->readbuf, USBLP_BUF_SIZE_IN,
|
|
usblp_bulk_read, usblp);
|
|
usb_anchor_urb(urb, &usblp->urbs);
|
|
|
|
spin_lock_irqsave(&usblp->lock, flags);
|
|
usblp->readcount = 0; /* XXX Why here? */
|
|
usblp->rcomplete = 0;
|
|
spin_unlock_irqrestore(&usblp->lock, flags);
|
|
if ((rc = usb_submit_urb(urb, GFP_KERNEL)) < 0) {
|
|
dbg("error submitting urb (%d)", rc);
|
|
spin_lock_irqsave(&usblp->lock, flags);
|
|
usblp->rstatus = rc;
|
|
usblp->rcomplete = 1;
|
|
spin_unlock_irqrestore(&usblp->lock, flags);
|
|
goto raise_submit;
|
|
}
|
|
|
|
return 0;
|
|
|
|
raise_submit:
|
|
usb_unanchor_urb(urb);
|
|
usb_free_urb(urb);
|
|
raise_urb:
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Checks for printers that have quirks, such as requiring unidirectional
|
|
* communication but reporting bidirectional; currently some HP printers
|
|
* have this flaw (HP 810, 880, 895, etc.), or needing an init string
|
|
* sent at each open (like some Epsons).
|
|
* Returns 1 if found, 0 if not found.
|
|
*
|
|
* HP recommended that we use the bidirectional interface but
|
|
* don't attempt any bulk IN transfers from the IN endpoint.
|
|
* Here's some more detail on the problem:
|
|
* The problem is not that it isn't bidirectional though. The problem
|
|
* is that if you request a device ID, or status information, while
|
|
* the buffers are full, the return data will end up in the print data
|
|
* buffer. For example if you make sure you never request the device ID
|
|
* while you are sending print data, and you don't try to query the
|
|
* printer status every couple of milliseconds, you will probably be OK.
|
|
*/
|
|
static unsigned int usblp_quirks (__u16 vendor, __u16 product)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; quirk_printers[i].vendorId; i++) {
|
|
if (vendor == quirk_printers[i].vendorId &&
|
|
product == quirk_printers[i].productId)
|
|
return quirk_printers[i].quirks;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct file_operations usblp_fops = {
|
|
.owner = THIS_MODULE,
|
|
.read = usblp_read,
|
|
.write = usblp_write,
|
|
.poll = usblp_poll,
|
|
.unlocked_ioctl = usblp_ioctl,
|
|
.compat_ioctl = usblp_ioctl,
|
|
.open = usblp_open,
|
|
.release = usblp_release,
|
|
};
|
|
|
|
static char *usblp_nodename(struct device *dev)
|
|
{
|
|
return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
|
|
}
|
|
|
|
static struct usb_class_driver usblp_class = {
|
|
.name = "lp%d",
|
|
.nodename = usblp_nodename,
|
|
.fops = &usblp_fops,
|
|
.minor_base = USBLP_MINOR_BASE,
|
|
};
|
|
|
|
static ssize_t usblp_show_ieee1284_id(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct usb_interface *intf = to_usb_interface(dev);
|
|
struct usblp *usblp = usb_get_intfdata (intf);
|
|
|
|
if (usblp->device_id_string[0] == 0 &&
|
|
usblp->device_id_string[1] == 0)
|
|
return 0;
|
|
|
|
return sprintf(buf, "%s", usblp->device_id_string+2);
|
|
}
|
|
|
|
static DEVICE_ATTR(ieee1284_id, S_IRUGO, usblp_show_ieee1284_id, NULL);
|
|
|
|
static int usblp_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *dev = interface_to_usbdev (intf);
|
|
struct usblp *usblp;
|
|
int protocol;
|
|
int retval;
|
|
|
|
/* Malloc and start initializing usblp structure so we can use it
|
|
* directly. */
|
|
usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL);
|
|
if (!usblp) {
|
|
retval = -ENOMEM;
|
|
goto abort_ret;
|
|
}
|
|
usblp->dev = dev;
|
|
mutex_init(&usblp->wmut);
|
|
mutex_init (&usblp->mut);
|
|
spin_lock_init(&usblp->lock);
|
|
init_waitqueue_head(&usblp->rwait);
|
|
init_waitqueue_head(&usblp->wwait);
|
|
init_usb_anchor(&usblp->urbs);
|
|
usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
|
|
usblp->intf = intf;
|
|
|
|
/* Malloc device ID string buffer to the largest expected length,
|
|
* since we can re-query it on an ioctl and a dynamic string
|
|
* could change in length. */
|
|
if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
|
|
retval = -ENOMEM;
|
|
goto abort;
|
|
}
|
|
|
|
/*
|
|
* Allocate read buffer. We somewhat wastefully
|
|
* malloc both regardless of bidirectionality, because the
|
|
* alternate setting can be changed later via an ioctl.
|
|
*/
|
|
if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) {
|
|
retval = -ENOMEM;
|
|
goto abort;
|
|
}
|
|
|
|
/* Allocate buffer for printer status */
|
|
usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL);
|
|
if (!usblp->statusbuf) {
|
|
retval = -ENOMEM;
|
|
goto abort;
|
|
}
|
|
|
|
/* Lookup quirks for this printer. */
|
|
usblp->quirks = usblp_quirks(
|
|
le16_to_cpu(dev->descriptor.idVendor),
|
|
le16_to_cpu(dev->descriptor.idProduct));
|
|
|
|
/* Analyze and pick initial alternate settings and endpoints. */
|
|
protocol = usblp_select_alts(usblp);
|
|
if (protocol < 0) {
|
|
dbg("incompatible printer-class device 0x%4.4X/0x%4.4X",
|
|
le16_to_cpu(dev->descriptor.idVendor),
|
|
le16_to_cpu(dev->descriptor.idProduct));
|
|
retval = -ENODEV;
|
|
goto abort;
|
|
}
|
|
|
|
/* Setup the selected alternate setting and endpoints. */
|
|
if (usblp_set_protocol(usblp, protocol) < 0) {
|
|
retval = -ENODEV; /* ->probe isn't ->ioctl */
|
|
goto abort;
|
|
}
|
|
|
|
/* Retrieve and store the device ID string. */
|
|
usblp_cache_device_id_string(usblp);
|
|
retval = device_create_file(&intf->dev, &dev_attr_ieee1284_id);
|
|
if (retval)
|
|
goto abort_intfdata;
|
|
|
|
#ifdef DEBUG
|
|
usblp_check_status(usblp, 0);
|
|
#endif
|
|
|
|
usb_set_intfdata (intf, usblp);
|
|
|
|
usblp->present = 1;
|
|
|
|
retval = usb_register_dev(intf, &usblp_class);
|
|
if (retval) {
|
|
printk(KERN_ERR "usblp: Not able to get a minor"
|
|
" (base %u, slice default): %d\n",
|
|
USBLP_MINOR_BASE, retval);
|
|
goto abort_intfdata;
|
|
}
|
|
usblp->minor = intf->minor;
|
|
printk(KERN_INFO "usblp%d: USB %sdirectional printer dev %d "
|
|
"if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n",
|
|
usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum,
|
|
usblp->ifnum,
|
|
usblp->protocol[usblp->current_protocol].alt_setting,
|
|
usblp->current_protocol,
|
|
le16_to_cpu(usblp->dev->descriptor.idVendor),
|
|
le16_to_cpu(usblp->dev->descriptor.idProduct));
|
|
|
|
return 0;
|
|
|
|
abort_intfdata:
|
|
usb_set_intfdata (intf, NULL);
|
|
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
|
|
abort:
|
|
kfree(usblp->readbuf);
|
|
kfree(usblp->statusbuf);
|
|
kfree(usblp->device_id_string);
|
|
kfree(usblp);
|
|
abort_ret:
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* We are a "new" style driver with usb_device_id table,
|
|
* but our requirements are too intricate for simple match to handle.
|
|
*
|
|
* The "proto_bias" option may be used to specify the preferred protocol
|
|
* for all USB printers (1=7/1/1, 2=7/1/2, 3=7/1/3). If the device
|
|
* supports the preferred protocol, then we bind to it.
|
|
*
|
|
* The best interface for us is 7/1/2, because it is compatible
|
|
* with a stream of characters. If we find it, we bind to it.
|
|
*
|
|
* Note that the people from hpoj.sourceforge.net need to be able to
|
|
* bind to 7/1/3 (MLC/1284.4), so we provide them ioctls for this purpose.
|
|
*
|
|
* Failing 7/1/2, we look for 7/1/3, even though it's probably not
|
|
* stream-compatible, because this matches the behaviour of the old code.
|
|
*
|
|
* If nothing else, we bind to 7/1/1 - the unidirectional interface.
|
|
*/
|
|
static int usblp_select_alts(struct usblp *usblp)
|
|
{
|
|
struct usb_interface *if_alt;
|
|
struct usb_host_interface *ifd;
|
|
struct usb_endpoint_descriptor *epd, *epwrite, *epread;
|
|
int p, i, e;
|
|
|
|
if_alt = usblp->intf;
|
|
|
|
for (p = 0; p < USBLP_MAX_PROTOCOLS; p++)
|
|
usblp->protocol[p].alt_setting = -1;
|
|
|
|
/* Find out what we have. */
|
|
for (i = 0; i < if_alt->num_altsetting; i++) {
|
|
ifd = &if_alt->altsetting[i];
|
|
|
|
if (ifd->desc.bInterfaceClass != 7 || ifd->desc.bInterfaceSubClass != 1)
|
|
if (!(usblp->quirks & USBLP_QUIRK_BAD_CLASS))
|
|
continue;
|
|
|
|
if (ifd->desc.bInterfaceProtocol < USBLP_FIRST_PROTOCOL ||
|
|
ifd->desc.bInterfaceProtocol > USBLP_LAST_PROTOCOL)
|
|
continue;
|
|
|
|
/* Look for bulk OUT and IN endpoints. */
|
|
epwrite = epread = NULL;
|
|
for (e = 0; e < ifd->desc.bNumEndpoints; e++) {
|
|
epd = &ifd->endpoint[e].desc;
|
|
|
|
if (usb_endpoint_is_bulk_out(epd))
|
|
if (!epwrite)
|
|
epwrite = epd;
|
|
|
|
if (usb_endpoint_is_bulk_in(epd))
|
|
if (!epread)
|
|
epread = epd;
|
|
}
|
|
|
|
/* Ignore buggy hardware without the right endpoints. */
|
|
if (!epwrite || (ifd->desc.bInterfaceProtocol > 1 && !epread))
|
|
continue;
|
|
|
|
/* Turn off reads for 7/1/1 (unidirectional) interfaces
|
|
* and buggy bidirectional printers. */
|
|
if (ifd->desc.bInterfaceProtocol == 1) {
|
|
epread = NULL;
|
|
} else if (usblp->quirks & USBLP_QUIRK_BIDIR) {
|
|
printk(KERN_INFO "usblp%d: Disabling reads from "
|
|
"problematic bidirectional printer\n",
|
|
usblp->minor);
|
|
epread = NULL;
|
|
}
|
|
|
|
usblp->protocol[ifd->desc.bInterfaceProtocol].alt_setting =
|
|
ifd->desc.bAlternateSetting;
|
|
usblp->protocol[ifd->desc.bInterfaceProtocol].epwrite = epwrite;
|
|
usblp->protocol[ifd->desc.bInterfaceProtocol].epread = epread;
|
|
}
|
|
|
|
/* If our requested protocol is supported, then use it. */
|
|
if (proto_bias >= USBLP_FIRST_PROTOCOL &&
|
|
proto_bias <= USBLP_LAST_PROTOCOL &&
|
|
usblp->protocol[proto_bias].alt_setting != -1)
|
|
return proto_bias;
|
|
|
|
/* Ordering is important here. */
|
|
if (usblp->protocol[2].alt_setting != -1)
|
|
return 2;
|
|
if (usblp->protocol[1].alt_setting != -1)
|
|
return 1;
|
|
if (usblp->protocol[3].alt_setting != -1)
|
|
return 3;
|
|
|
|
/* If nothing is available, then don't bind to this device. */
|
|
return -1;
|
|
}
|
|
|
|
static int usblp_set_protocol(struct usblp *usblp, int protocol)
|
|
{
|
|
int r, alts;
|
|
|
|
if (protocol < USBLP_FIRST_PROTOCOL || protocol > USBLP_LAST_PROTOCOL)
|
|
return -EINVAL;
|
|
|
|
alts = usblp->protocol[protocol].alt_setting;
|
|
if (alts < 0)
|
|
return -EINVAL;
|
|
r = usb_set_interface(usblp->dev, usblp->ifnum, alts);
|
|
if (r < 0) {
|
|
printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n",
|
|
alts, usblp->ifnum);
|
|
return r;
|
|
}
|
|
|
|
usblp->bidir = (usblp->protocol[protocol].epread != NULL);
|
|
usblp->current_protocol = protocol;
|
|
dbg("usblp%d set protocol %d", usblp->minor, protocol);
|
|
return 0;
|
|
}
|
|
|
|
/* Retrieves and caches device ID string.
|
|
* Returns length, including length bytes but not null terminator.
|
|
* On error, returns a negative errno value. */
|
|
static int usblp_cache_device_id_string(struct usblp *usblp)
|
|
{
|
|
int err, length;
|
|
|
|
err = usblp_get_id(usblp, 0, usblp->device_id_string, USBLP_DEVICE_ID_SIZE - 1);
|
|
if (err < 0) {
|
|
dbg("usblp%d: error = %d reading IEEE-1284 Device ID string",
|
|
usblp->minor, err);
|
|
usblp->device_id_string[0] = usblp->device_id_string[1] = '\0';
|
|
return -EIO;
|
|
}
|
|
|
|
/* First two bytes are length in big-endian.
|
|
* They count themselves, and we copy them into
|
|
* the user's buffer. */
|
|
length = be16_to_cpu(*((__be16 *)usblp->device_id_string));
|
|
if (length < 2)
|
|
length = 2;
|
|
else if (length >= USBLP_DEVICE_ID_SIZE)
|
|
length = USBLP_DEVICE_ID_SIZE - 1;
|
|
usblp->device_id_string[length] = '\0';
|
|
|
|
dbg("usblp%d Device ID string [len=%d]=\"%s\"",
|
|
usblp->minor, length, &usblp->device_id_string[2]);
|
|
|
|
return length;
|
|
}
|
|
|
|
static void usblp_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct usblp *usblp = usb_get_intfdata (intf);
|
|
|
|
usb_deregister_dev(intf, &usblp_class);
|
|
|
|
if (!usblp || !usblp->dev) {
|
|
dev_err(&intf->dev, "bogus disconnect\n");
|
|
BUG ();
|
|
}
|
|
|
|
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
|
|
|
|
mutex_lock (&usblp_mutex);
|
|
mutex_lock (&usblp->mut);
|
|
usblp->present = 0;
|
|
wake_up(&usblp->wwait);
|
|
wake_up(&usblp->rwait);
|
|
usb_set_intfdata (intf, NULL);
|
|
|
|
usblp_unlink_urbs(usblp);
|
|
mutex_unlock (&usblp->mut);
|
|
|
|
if (!usblp->used)
|
|
usblp_cleanup (usblp);
|
|
mutex_unlock (&usblp_mutex);
|
|
}
|
|
|
|
static int usblp_suspend (struct usb_interface *intf, pm_message_t message)
|
|
{
|
|
struct usblp *usblp = usb_get_intfdata (intf);
|
|
|
|
/* we take no more IO */
|
|
usblp->sleeping = 1;
|
|
usblp_unlink_urbs(usblp);
|
|
#if 0 /* XXX Do we want this? What if someone is reading, should we fail? */
|
|
/* not strictly necessary, but just in case */
|
|
wake_up(&usblp->wwait);
|
|
wake_up(&usblp->rwait);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usblp_resume (struct usb_interface *intf)
|
|
{
|
|
struct usblp *usblp = usb_get_intfdata (intf);
|
|
int r;
|
|
|
|
usblp->sleeping = 0;
|
|
r = handle_bidir (usblp);
|
|
|
|
return r;
|
|
}
|
|
|
|
static struct usb_device_id usblp_ids [] = {
|
|
{ USB_DEVICE_INFO(7, 1, 1) },
|
|
{ USB_DEVICE_INFO(7, 1, 2) },
|
|
{ USB_DEVICE_INFO(7, 1, 3) },
|
|
{ USB_INTERFACE_INFO(7, 1, 1) },
|
|
{ USB_INTERFACE_INFO(7, 1, 2) },
|
|
{ USB_INTERFACE_INFO(7, 1, 3) },
|
|
{ USB_DEVICE(0x04b8, 0x0202) }, /* Seiko Epson Receipt Printer M129C */
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE (usb, usblp_ids);
|
|
|
|
static struct usb_driver usblp_driver = {
|
|
.name = "usblp",
|
|
.probe = usblp_probe,
|
|
.disconnect = usblp_disconnect,
|
|
.suspend = usblp_suspend,
|
|
.resume = usblp_resume,
|
|
.id_table = usblp_ids,
|
|
.supports_autosuspend = 1,
|
|
};
|
|
|
|
static int __init usblp_init(void)
|
|
{
|
|
return usb_register(&usblp_driver);
|
|
}
|
|
|
|
static void __exit usblp_exit(void)
|
|
{
|
|
usb_deregister(&usblp_driver);
|
|
}
|
|
|
|
module_init(usblp_init);
|
|
module_exit(usblp_exit);
|
|
|
|
MODULE_AUTHOR( DRIVER_AUTHOR );
|
|
MODULE_DESCRIPTION( DRIVER_DESC );
|
|
module_param(proto_bias, int, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(proto_bias, "Favourite protocol number");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
|
|
|
|
/* LDV_COMMENT_BEGIN_MAIN */
|
|
#ifdef LDV_MAIN0_plain_sorted_withcheck
|
|
|
|
/*###########################################################################*/
|
|
|
|
/*############## Driver Environment Generator 0.2 output ####################*/
|
|
|
|
/*###########################################################################*/
|
|
|
|
|
|
|
|
/* LDV_COMMENT_FUNCTION_DECLARE_LDV Special function for LDV verifier. Test if all kernel resources are correctly released by driver before driver will be unloaded. */
|
|
void check_final_state(void);
|
|
|
|
/* LDV_COMMENT_FUNCTION_DECLARE_LDV Special function for LDV verifier. Test correct return result. */
|
|
void check_return_value(int res);
|
|
|
|
/* LDV_COMMENT_FUNCTION_DECLARE_LDV Special function for LDV verifier. Initializes the model. */
|
|
void ldv_initialize(void);
|
|
|
|
/* LDV_COMMENT_FUNCTION_DECLARE_LDV Special function for LDV verifier. Returns arbitrary interger value. */
|
|
int nondet_int(void);
|
|
|
|
/* LDV_COMMENT_VAR_DECLARE_LDV Special variable for LDV verifier. */
|
|
extern int IN_INTERRUPT;
|
|
|
|
/* LDV_COMMENT_FUNCTION_MAIN Main function for LDV verifier. */
|
|
void ldv_main0_plain_sorted_withcheck(void) {
|
|
|
|
|
|
|
|
/* LDV_COMMENT_FUNCTION_CALL Initialize LDV model. */
|
|
ldv_initialize();
|
|
|
|
/* LDV_COMMENT_BEGIN_VARIABLE_DECLARATION_PART */
|
|
/*============================= VARIABLE DECLARATION PART =============================*/
|
|
/** STRUCT: struct type: file_operations, struct name: file_operations **/
|
|
/* content: static int usblp_open(struct inode *inode, struct file *file)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_open" */
|
|
struct inode * var_usblp_open_0_p0;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_open" */
|
|
struct file * var_usblp_open_0_p1;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for test return result from function call "usblp_open" */
|
|
static int res_usblp_open_0;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static int usblp_release(struct inode *inode, struct file *file)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_release" */
|
|
struct inode * var_usblp_release_1_p0;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_release" */
|
|
struct file * var_usblp_release_1_p1;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static unsigned int usblp_poll(struct file *file, struct poll_table_struct *wait)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_poll" */
|
|
struct file * var_usblp_poll_2_p0;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_poll" */
|
|
struct poll_table_struct * var_usblp_poll_2_p1;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_ioctl" */
|
|
struct file * var_usblp_ioctl_3_p0;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_ioctl" */
|
|
unsigned int var_usblp_ioctl_3_p1;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_ioctl" */
|
|
unsigned long var_usblp_ioctl_3_p2;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_write" */
|
|
struct file * var_usblp_write_4_p0;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_write" */
|
|
const char __user * var_usblp_write_4_p1;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_write" */
|
|
size_t var_usblp_write_4_p2;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_write" */
|
|
loff_t * var_usblp_write_4_p3;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for test return result from function call "usblp_write" */
|
|
static ssize_t res_usblp_write_4;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_read" */
|
|
struct file * var_usblp_read_5_p0;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_read" */
|
|
char __user * var_usblp_read_5_p1;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_read" */
|
|
size_t var_usblp_read_5_p2;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_read" */
|
|
loff_t * var_usblp_read_5_p3;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for test return result from function call "usblp_read" */
|
|
static ssize_t res_usblp_read_5;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
|
|
/** STRUCT: struct type: usb_class_driver, struct name: usb_class_driver **/
|
|
/* content: static char *usblp_nodename(struct device *dev)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_nodename" */
|
|
struct device * var_usblp_nodename_6_p0;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
|
|
/** STRUCT: struct type: usb_driver, struct name: usb_driver **/
|
|
/* content: static int usblp_probe(struct usb_interface *intf, const struct usb_device_id *id)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_probe" */
|
|
struct usb_interface * var_usblp_probe_7_p0;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_probe" */
|
|
const struct usb_device_id * var_usblp_probe_7_p1;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for test return result from function call "usblp_probe" */
|
|
static int res_usblp_probe_7;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static void usblp_disconnect(struct usb_interface *intf)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_disconnect" */
|
|
struct usb_interface * var_usblp_disconnect_8_p0;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static int usblp_suspend (struct usb_interface *intf, pm_message_t message)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_suspend" */
|
|
struct usb_interface * var_usblp_suspend_9_p0;
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_suspend" */
|
|
pm_message_t var_usblp_suspend_9_p1;
|
|
/* content: static int usblp_resume (struct usb_interface *intf)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_VAR_DECLARE Variable declaration for function "usblp_resume" */
|
|
struct usb_interface * var_usblp_resume_10_p0;
|
|
|
|
|
|
|
|
|
|
/* LDV_COMMENT_END_VARIABLE_DECLARATION_PART */
|
|
/* LDV_COMMENT_BEGIN_VARIABLE_INITIALIZING_PART */
|
|
/*============================= VARIABLE INITIALIZING PART =============================*/
|
|
IN_INTERRUPT = 1;
|
|
|
|
|
|
|
|
|
|
/* LDV_COMMENT_END_VARIABLE_INITIALIZING_PART */
|
|
/* LDV_COMMENT_BEGIN_FUNCTION_CALL_SECTION */
|
|
/*============================= FUNCTION CALL SECTION =============================*/
|
|
/** INIT: init_type: ST_MODULE_INIT **/
|
|
/* content: static int __init usblp_init(void)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Kernel calls driver init function after driver loading to kernel. This function declared as "MODULE_INIT(function name)". */
|
|
if(usblp_init())
|
|
goto ldv_final;
|
|
|
|
/** STRUCT: struct type: file_operations, struct name: usblp_fops **/
|
|
/* content: static int usblp_open(struct inode *inode, struct file *file)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Function from field "open" from driver structure with callbacks "usblp_fops". Standart function test for correct return result. */
|
|
res_usblp_open_0 = usblp_open( var_usblp_open_0_p0, var_usblp_open_0_p1);
|
|
check_return_value(res_usblp_open_0);
|
|
if(res_usblp_open_0)
|
|
goto ldv_module_exit;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, loff_t *ppos)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Function from field "read" from driver structure with callbacks "usblp_fops". Standart function test for correct return result. */
|
|
res_usblp_read_5 = usblp_read( var_usblp_read_5_p0, var_usblp_read_5_p1, var_usblp_read_5_p2, var_usblp_read_5_p3);
|
|
check_return_value(res_usblp_read_5);
|
|
if(res_usblp_read_5 < 0)
|
|
goto ldv_module_exit;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Function from field "write" from driver structure with callbacks "usblp_fops". Standart function test for correct return result. */
|
|
res_usblp_write_4 = usblp_write( var_usblp_write_4_p0, var_usblp_write_4_p1, var_usblp_write_4_p2, var_usblp_write_4_p3);
|
|
check_return_value(res_usblp_write_4);
|
|
if(res_usblp_write_4 < 0)
|
|
goto ldv_module_exit;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static int usblp_release(struct inode *inode, struct file *file)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Function from field "release" from driver structure with callbacks "usblp_fops" */
|
|
usblp_release( var_usblp_release_1_p0, var_usblp_release_1_p1);
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static unsigned int usblp_poll(struct file *file, struct poll_table_struct *wait)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Function from field "poll" from driver structure with callbacks "usblp_fops" */
|
|
usblp_poll( var_usblp_poll_2_p0, var_usblp_poll_2_p1);
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Function from field "unlocked_ioctl" from driver structure with callbacks "usblp_fops" */
|
|
usblp_ioctl( var_usblp_ioctl_3_p0, var_usblp_ioctl_3_p1, var_usblp_ioctl_3_p2);
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
|
|
/** STRUCT: struct type: usb_class_driver, struct name: usblp_class **/
|
|
/* content: static char *usblp_nodename(struct device *dev)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Function from field "nodename" from driver structure with callbacks "usblp_class" */
|
|
usblp_nodename( var_usblp_nodename_6_p0);
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
|
|
/** STRUCT: struct type: usb_driver, struct name: usblp_driver **/
|
|
/* content: static int usblp_probe(struct usb_interface *intf, const struct usb_device_id *id)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Function from field "probe" from driver structure with callbacks "usblp_driver". Standart function test for correct return result. */
|
|
res_usblp_probe_7 = usblp_probe( var_usblp_probe_7_p0, var_usblp_probe_7_p1);
|
|
check_return_value(res_usblp_probe_7);
|
|
if(res_usblp_probe_7)
|
|
goto ldv_module_exit;
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* content: static int usblp_suspend (struct usb_interface *intf, pm_message_t message)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Function from field "suspend" from driver structure with callbacks "usblp_driver" */
|
|
usblp_suspend( var_usblp_suspend_9_p0, var_usblp_suspend_9_p1);
|
|
/* content: static int usblp_resume (struct usb_interface *intf)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Function from field "resume" from driver structure with callbacks "usblp_driver" */
|
|
usblp_resume( var_usblp_resume_10_p0);
|
|
/* content: static void usblp_disconnect(struct usb_interface *intf)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Function from field "disconnect" from driver structure with callbacks "usblp_driver" */
|
|
usblp_disconnect( var_usblp_disconnect_8_p0);
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
|
|
ldv_module_exit:
|
|
|
|
/** INIT: init_type: ST_MODULE_EXIT **/
|
|
/* content: static void __exit usblp_exit(void)*/
|
|
/* LDV_COMMENT_BEGIN_PREP */
|
|
#undef DEBUG
|
|
#define DRIVER_AUTHOR "Michael Gee, Pavel Machek, Vojtech Pavlik, Randy Dunlap, Pete Zaitcev, David Paschal"
|
|
#define DRIVER_DESC "USB Printer Device Class driver"
|
|
#define USBLP_BUF_SIZE 8192
|
|
#define USBLP_BUF_SIZE_IN 1024
|
|
#define USBLP_DEVICE_ID_SIZE 1024
|
|
#define IOCNR_GET_DEVICE_ID 1
|
|
#define IOCNR_GET_PROTOCOLS 2
|
|
#define IOCNR_SET_PROTOCOL 3
|
|
#define IOCNR_HP_SET_CHANNEL 4
|
|
#define IOCNR_GET_BUS_ADDRESS 5
|
|
#define IOCNR_GET_VID_PID 6
|
|
#define IOCNR_SOFT_RESET 7
|
|
#define LPIOC_GET_DEVICE_ID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
|
|
#define LPIOC_GET_PROTOCOLS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_PROTOCOLS, len)
|
|
#define LPIOC_SET_PROTOCOL _IOC(_IOC_WRITE, 'P', IOCNR_SET_PROTOCOL, 0)
|
|
#define LPIOC_HP_SET_CHANNEL _IOC(_IOC_WRITE, 'P', IOCNR_HP_SET_CHANNEL, 0)
|
|
#define LPIOC_GET_BUS_ADDRESS(len) _IOC(_IOC_READ, 'P', IOCNR_GET_BUS_ADDRESS, len)
|
|
#define LPIOC_GET_VID_PID(len) _IOC(_IOC_READ, 'P', IOCNR_GET_VID_PID, len)
|
|
#define LPIOC_SOFT_RESET _IOC(_IOC_NONE, 'P', IOCNR_SOFT_RESET, 0);
|
|
#define USBLP_REQ_GET_ID 0x00
|
|
#define USBLP_REQ_GET_STATUS 0x01
|
|
#define USBLP_REQ_RESET 0x02
|
|
#define USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST 0x00
|
|
#define USBLP_MINORS 16
|
|
#define USBLP_MINOR_BASE 0
|
|
#define USBLP_CTL_TIMEOUT 5000
|
|
#define USBLP_FIRST_PROTOCOL 1
|
|
#define USBLP_LAST_PROTOCOL 3
|
|
#define USBLP_MAX_PROTOCOLS (USBLP_LAST_PROTOCOL+1)
|
|
#define STATUS_BUF_SIZE 8
|
|
#ifdef DEBUG
|
|
#endif
|
|
#define USBLP_QUIRK_BIDIR 0x1
|
|
#define USBLP_QUIRK_USB_INIT 0x2
|
|
#define USBLP_QUIRK_BAD_CLASS 0x4
|
|
#define usblp_read_status(usblp, status)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_STATUS, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, 0, status, 1)
|
|
#define usblp_get_id(usblp, config, id, maxlen)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_GET_ID, USB_TYPE_CLASS, USB_DIR_IN, USB_RECIP_INTERFACE, config, id, maxlen)
|
|
#define usblp_reset(usblp)\
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
|
|
#define usblp_hp_channel_change_request(usblp, channel, buffer) \
|
|
usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
|
|
#ifdef DEBUG
|
|
#endif
|
|
#ifdef DEBUG
|
|
#endif
|
|
#if 0
|
|
#endif
|
|
/* LDV_COMMENT_END_PREP */
|
|
/* LDV_COMMENT_FUNCTION_CALL Kernel calls driver release function before driver will be uploaded from kernel. This function declared as "MODULE_EXIT(function name)". */
|
|
usblp_exit();
|
|
|
|
/* LDV_COMMENT_FUNCTION_CALL Checks that all resources and locks are correctly released before the driver will be unloaded. */
|
|
ldv_final: check_final_state();
|
|
|
|
/* LDV_COMMENT_END_FUNCTION_CALL_SECTION */
|
|
return;
|
|
|
|
}
|
|
#endif
|
|
|
|
/* LDV_COMMENT_END_MAIN */
|