Project

General

Profile

Template Description Language » History » Version 79

Andrei Tatarnikov, 05/22/2014 11:16 AM

1 5 Alexander Kamkin
h1. Template Description Language
2 4 Alexander Kamkin
3
_~By Artemiy Utekhin~_
4 1 Alexander Kamkin
5 21 Alexander Kamkin
*UNDER CONSTRUCTION*
6
7 6 Alexander Kamkin
{{toc}}
8
9 27 Andrei Tatarnikov
h2. Introduction
10
11 30 Andrei Tatarnikov
MicroTESK generates test programs on the basis of _*test templates*_ that provide an abstract description of scenarios to be reproduced by the generated programs. Test templates are created using the _*test template description language*_. It is a Ruby-based domain-specific language that provides facilities to describe tests in terms of the target microprocessor''s ISA and to manage the structure of the generated test programs. The language is implemented as a library that includes functionality for describing test templates and for processing these test templates to produce a test program. MicroTESK uses the JRuby interpreter to process test templates, which allows interaction between Ruby libraries and other parts of MicroTESK written in Java.
12 1 Alexander Kamkin
13 45 Andrei Tatarnikov
h2. How It Works
14 1 Alexander Kamkin
15 55 Andrei Tatarnikov
A test template in Ruby describes a test program in terms of the model of the target microprocessor. The structure of the test program is described using built-in features of Ruby (conditions, loops, etc.) and facilities provided by MicroTESK libraries (instruction blocks that help organize instruction sequences). To provide access to such elements of the model as instructions, addressing modes and test situations, corresponding methods are created at runtime on the basis on the meta-information provided by the model. The test template subsystem interacts with the model and the testing library of MicroTESK to create a symbolic test program, simulate it on the model and generate its textual representation. Generally speaking, processing of a test template is performed in the following steps:
16 46 Andrei Tatarnikov
17
# The model of the microprocessor is loaded;
18
# Runtime methods to access architecture-specific elements are created on the basis of the model''s meta-information;
19
# The code of the test template is executed to build a hierarchy of instruction call blocks;
20 51 Andrei Tatarnikov
# Instruction call blocks are processed bottom-up to produce sequences of abstract instruction calls (at this step, their arguments can be described as a set of conditions instead of being assigned concrete values);
21 53 Andrei Tatarnikov
# A symbolic test program is built on the basis of the produced abstract instruction call sequences by applying corresponding algorithms to find values satisfying the specified conditions;
22 47 Andrei Tatarnikov
# The symbolic test program is simulated on the microprocessor model;
23 54 Andrei Tatarnikov
# The code of the test program is generated and saved to the output file.
24 1 Alexander Kamkin
25 3 Artemiy Utekhin
h2. Configuration
26 1 Alexander Kamkin
27 43 Andrei Tatarnikov
Global settings for the test template subsystem are specified in the <code>config.rb</code> file. These settings are related to the package structure and dependencies of the subsystem. They are predefined and rarely need to be modified. Also, there are local settings that control processing of individual test templates. They are specified as member variables of the <code>Template</code> class. Test templates can override these settings to customize the behavior of the subsystem. The settings will be discussed in more detail in the "Writing Test Templates" section.
28 1 Alexander Kamkin
29 35 Andrei Tatarnikov
h2. Running Test Program Generation
30 1 Alexander Kamkin
31 33 Andrei Tatarnikov
To start test program generation, a user needs to run the <code>generate.sh</code> script (Unix, Linux, OS X) or the <code>generate.bat</code> script (Windows) located in the <code>bin</code> folder. The script launches a Ruby program that processes the specified test template and produces a test program. The command to run the script has the following format: 
32 1 Alexander Kamkin
33
<pre>generate <model name> <template file.rb> [<output file.asm>]</pre>
34 7 Artemiy Utekhin
35 34 Andrei Tatarnikov
There are three parameters: (1) the name of the microprocessor model (generated by the [[Sim-nML Translator]] on the basis of Sim-nML specifications), (2) the name of the test template file to be processed and (3) the name of the test program file to be generated (optional, if it is skipped the program is printed to the console). For example, the following command processes the <code>demo_template.rb</code> test template and saves the generated test program to the <code>test.asm</code> file:
36 7 Artemiy Utekhin
37 31 Andrei Tatarnikov
<pre>sh bin/generate.sh demo arch/demo/templates/demo_template.rb test.asm</pre>
38 1 Alexander Kamkin
39 56 Andrei Tatarnikov
h2. Writing Test Templates
40
41 57 Andrei Tatarnikov
h3. Test Template Structure
42
43 58 Andrei Tatarnikov
A test template is a class inherited from the <code>Template</code> library class that provides access to all features of the library. In other words, you need to start with creating a class that would subclass <code>Template</code>. MicroTESK stores information on the location of the <code>Template</code> class in the <code>TEMPLATE</code> environment variable. So, the definition of your test template class will look like this:
44 57 Andrei Tatarnikov
45
<pre><code class="ruby">
46
require ENV[''TEMPLATE'']
47
48
class MyTemplate < Template</code></pre>
49 1 Alexander Kamkin
50 58 Andrei Tatarnikov
The test template class should contain the implementations of the following methods:
51
52 59 Andrei Tatarnikov
# <code>initialize</code> (optional) - Configure settings for the given test template;
53
# <code>pre</code> (optional) - Holds the initialization code for the test program;
54
# <code>post</code> (optional) - Holds the finalization code for the test program;
55
# <code>run</code> (optional) - Holds the main code of the test program (testing problem description).
56 58 Andrei Tatarnikov
57 63 Andrei Tatarnikov
The definitions of optional methods can be skipped. In this case, the default implementations provided by the parent class will be used. The default implementation of the <code>initialize</code> method initializes the settings with default values. The default implementations of the <code>pre</code> and <code>post</code> methods do nothing.
58
59 64 Andrei Tatarnikov
The full interface of a test template looks as follows:
60 60 Andrei Tatarnikov
61
<pre><code class="ruby">require ENV[''TEMPLATE'']
62
63
class MyTemplate < Template
64
65
  def initialize
66
    super
67
    # Initialize settings here 
68
  end
69
70
  def pre
71
    # Place your initialization code here
72
  end
73
74
  def post
75
    # Place your finalization code here
76
  end
77
78
  def run
79
    # Place your test problem description here
80
  end
81
82 61 Andrei Tatarnikov
end</code></pre>
83 57 Andrei Tatarnikov
84 65 Andrei Tatarnikov
h3. Reusing Test Templates
85
86 70 Andrei Tatarnikov
It is possible to reuse code of existing test templates in other test templates. To do this, you need to subclass the template you want to reuse instead of the <code>Template</code> class. For example, the <code>MyTemplate</code> class below reuses code from the <code>MyPrepost</code> class that provides initialization and finalization code for similar test templates.
87 68 Andrei Tatarnikov
88
<pre><code class="ruby">require ENV[''TEMPLATE'']
89
require_relative ''MyPrepost''
90
91 71 Andrei Tatarnikov
class MyTemplate < MyPrepost
92
93
  def run
94
  ... 
95
  end
96
97
end</code></pre>
98 68 Andrei Tatarnikov
99 74 Andrei Tatarnikov
h3. Test Template Settings
100
101 78 Andrei Tatarnikov
Test templates use the following settings:
102
103
# Enable using the test template to generate a test program (some templates are designed to be used as base classes only);
104
# Use the standard output to print the generated test program (in addition to the output file);
105
# Enable logging information on the simulated instruction calls;
106
# Starting characters for single-line comments in the test program;
107
# Starting characters for multi-line comments in the test program;
108
# Terminating characters for multi-line comments in the test program.
109
110 79 Andrei Tatarnikov
Here is how these settings are initialized with default values in the <code>Template</code> class:
111 75 Andrei Tatarnikov
112 79 Andrei Tatarnikov
<pre><code class="ruby">@is_executable          = true
113 1 Alexander Kamkin
@use_stdout             = true
114 78 Andrei Tatarnikov
@log_execution          = true
115
@sl_comment_starts_with = "// "
116
@ml_comment_starts_with = "/*"
117 79 Andrei Tatarnikov
@ml_comment_ends_with   = "*/"</code></pre>
118 72 Andrei Tatarnikov
119 67 Andrei Tatarnikov
h3. Describing Instruction Calls
120 1 Alexander Kamkin
121 3 Artemiy Utekhin
Methods of a test template class contain specifications of instruction call sequences. Instruction calls are specified using the *_instruction_* and *_addressing mode_* abstractions.
122 1 Alexander Kamkin
123 20 Alexander Kamkin
h2. *TODO: REWRITE*
124 1 Alexander Kamkin
125 20 Alexander Kamkin
h3. Basic features
126 1 Alexander Kamkin
127 11 Andrei Tatarnikov
The two core abstractions used by MicroTESK parser/simulator and Ruby-TDL are an *instruction* and an *addressing mode*. An instruction is rather self-explanatory, it simply represents a target assembler instruction. Every argument of an instruction is a parametrized *addressing mode* that explains the meaning of the provided values to the simulator. The mode could point to the registers, for instance, or to a specific memory location. It can also denote an immediate value - e.g. a simple integer or a string. Thus, a basic template is effectively a sequence of instructions with parametrized addressing modes as their arguments.
128 1 Alexander Kamkin
129 11 Andrei Tatarnikov
Each template is a class that inherits a basic Template class that provides most of the core Ruby-TDL functionality. So, to write a template you need to subclass Template first:
130 1 Alexander Kamkin
131 20 Alexander Kamkin
<pre><code class="ruby">require_relative "_path-to-the-rubymt-library_/mtruby"
132 1 Alexander Kamkin
133 3 Artemiy Utekhin
class MyTemplate < Template</code></pre>
134 1 Alexander Kamkin
135 10 Andrei Tatarnikov
While processing a template Ruby-TDL calls its %pre%, %run% and %post% methods, loosely meaning the pre-conditions, the main body and the post-conditions. The %pre% method is mostly useful for setup common to many templates, the %post% method will be more important once sequential testing is introduced. Most of the template code is supposed to be in the %run% method. Thus, a template needs to override one or more of these methods, most commonly %run%.
136 1 Alexander Kamkin
137 3 Artemiy Utekhin
To get %pre% and %post% over with, the most common usage of these is to make a special non-executable class and then subclass it with the actual templates:
138
139
<pre><code class="ruby">require_relative "_path-to-the-rubymt-library_/mtruby"
140
141
class MyPrepost < Template
142 1 Alexander Kamkin
  def initialize
143 3 Artemiy Utekhin
    super
144
    @is_executable = no
145
  end
146 1 Alexander Kamkin
147 3 Artemiy Utekhin
  def pre
148
    # Your ''startup'' code goes here
149
  end
150 9 Andrei Tatarnikov
151 1 Alexander Kamkin
  def post
152 11 Andrei Tatarnikov
    # Your ''cleanup'' code goes here
153 1 Alexander Kamkin
  end
154 3 Artemiy Utekhin
end</code></pre>
155
156
<pre><code class="ruby">require_relative "_path-to-the-rubymt-library_/mtruby"
157
158
class MyTemplate < MyPrepost
159
  def initialize
160
    super
161
    @is_executable = yes
162
  end
163 11 Andrei Tatarnikov
  
164 1 Alexander Kamkin
  def run
165 3 Artemiy Utekhin
    # Your template code goes here
166 1 Alexander Kamkin
  end
167 16 Andrei Tatarnikov
end</code></pre>
168 1 Alexander Kamkin
169 3 Artemiy Utekhin
These methods essentially contain the instructions. The general instruction format is slightly more intimidating than the native assembler and looks like this:
170 1 Alexander Kamkin
171 16 Andrei Tatarnikov
<pre><code class="ruby">instruction_name addr_mode1(:arg1_1 => value, :arg1_2 => value, ...), addr_mode2(:arg2_1 => value, ...), ...</code></pre>
172 1 Alexander Kamkin
173 3 Artemiy Utekhin
So, for instance, if the simulator has an ADD(MEM(i), MEM(i)|IMM(i)) instruction, it would look like:
174 1 Alexander Kamkin
175 16 Andrei Tatarnikov
<pre><code class="ruby">add mem(:i => 42), imm(:i => 128)</code></pre>
176 3 Artemiy Utekhin
177 8 Artemiy Utekhin
Thankfully, there are shortcuts. If there''s only one argument expected in the addressing mode, you can simply write its value and never have to worry about the argument name. And, by convention, the immediate values are always denoted in the simulator as the IMM addressing mode, so the template parser automatically accepts numbers and strings as such. Thus, in this case, the instruction can be simplified to:
178
179 16 Andrei Tatarnikov
<pre><code class="ruby">add mem(42), 128</code></pre>
180 8 Artemiy Utekhin
181 3 Artemiy Utekhin
As a matter of fact, if you''re sure about the order of addressing mode arguments, you can omit the names altogether and simply provide the values:
182
183
<pre><code class="ruby">instruction_name addr_mode1(value1, value2, ...) ...</code></pre>
184
185
If the name of the instruction conflicts with an already existing Ruby method, the instruction will be available with an %op_% prefix before its name.
186
187
h3. Test situations
188
189
_This section is to be taken with a grain of salt because the logic and the interface behind the situations is not yet finalized and mostly missing from the templates and shouldn''t be used yet_
190
191 17 Andrei Tatarnikov
_Big TODO: define what is a test situation_
192 3 Artemiy Utekhin
193
To denote a test situation, add a Ruby block that describes situations to an instruction, this will loosely look like this (likely similar to the way the addressing modes are denoted):
194
195
<pre><code class="ruby">sub mem(42), mem(21) do overflow(:op1 => 123, :op2 => 456) end</code></pre>
196
197 12 Andrei Tatarnikov
h3. Instruction blocks
198 3 Artemiy Utekhin
199
Sometimes a certain test situation should influence more than just one instruction. In that case, you can pass the instructions in an atomic block that can optionally accept a Proc of situations as its argument (because Ruby doesn''t want to be nice and allow multiple blocks for a method, and passing a Hash of Proc can hardly be called comfortable).
200
201
<pre><code class="ruby">p = lambda { overflow(:op1 => 123, :op2 => 456) }
202
203 12 Andrei Tatarnikov
atomic p {
204 3 Artemiy Utekhin
  mov mem(25), mem(26)
205 25 Andrei Tatarnikov
  add mem(27), 28
206 3 Artemiy Utekhin
  sub mem(29), 30
207 24 Andrei Tatarnikov
}</code></pre>
208
209
h3. Groups and random selections _(N.B. REMOVED in r1923. The implementation does not work in the current build and, therefore, was removed. The described features must be reviewed and reimplemented if required.)_
210
211
From source code comments:
212
213
<pre>
214
# VERY UNTESTED leftovers from the previous version ("V2", this is V3)
215
# Should work with the applied fixes but I''d be very careful to use these
216
217 3 Artemiy Utekhin
# As things stand this is just a little discrete probability utility that
218
# may or may not find its way into the potential ruby part of the test engine
219
</pre>
220
221 17 Andrei Tatarnikov
There are certain ways to group together or randomize addressing modes and instructions.
222 3 Artemiy Utekhin
223
To group several addressing modes together (this only works if they have similar arguments) create a mode group like this:
224
225 17 Andrei Tatarnikov
<pre><code class="ruby">mode_group "my_group" [:mem, :imm]</code></pre>
226 3 Artemiy Utekhin
227
You can also set weights to each of the modes in the group like this:
228
229 17 Andrei Tatarnikov
<pre><code class="ruby">mode_group "my_group" {:mem => 1.5, :imm => 2.5}</code></pre>
230 3 Artemiy Utekhin
231
The name of the group is converted into a method in the Template class. To select a random mode from a group, use %sample% on this generated method:
232
233
<pre><code class="ruby">add mem(42), my_group.sample(21)</code></pre>
234
235 17 Andrei Tatarnikov
_TODO: sampling already parametrized modes_
236 3 Artemiy Utekhin
237 17 Andrei Tatarnikov
The first method of grouping instructions works in a similar manner with the same restrictions on arguments:
238 3 Artemiy Utekhin
239 17 Andrei Tatarnikov
<pre><code class="ruby">group "i_group" [:add, :sub]</code></pre>
240 3 Artemiy Utekhin
241
<pre><code class="ruby">group "i_group" {:add => 0.3, :sub => 0.7]</code></pre>
242
243 17 Andrei Tatarnikov
<pre><code class="ruby">i_group.sample mem(42), 21</code></pre>
244 3 Artemiy Utekhin
245
You can also run all of the instructions in a group at once by using the %all% method:
246
247 17 Andrei Tatarnikov
<pre><code class="ruby">i_group.all mem(42), 21</code></pre>
248 3 Artemiy Utekhin
249
The second one allows you to create a normal block of instructions, setting their arguments separately. 
250
251 17 Andrei Tatarnikov
<pre><code class="ruby">block_group "b_group" do
252 3 Artemiy Utekhin
  mov mem(25), mem(26)
253
  add mem(27), 28
254
  sub mem(29), 30
255 17 Andrei Tatarnikov
end</code></pre>
256 3 Artemiy Utekhin
257
In this case to set weights you should call a %prob% method before every instruction:
258
259
<pre><code class="ruby">block_group "b_group" do
260
  prob 0.1
261
  mov mem(25), mem(26)
262 17 Andrei Tatarnikov
  prob 0.7
263 3 Artemiy Utekhin
  add mem(27), 28
264
  prob 0.4
265
  sub mem(29), 30
266 18 Andrei Tatarnikov
end</code></pre>
267
268 3 Artemiy Utekhin
The usage is almost identical, but without providing the arguments as they are already set:
269
270
<pre><code class="ruby">b_group.sample
271
b_group.all</code></pre>
272
273
_Not sure how does it work inside atomics when the group is defined outside, needs more consideration_
274 8 Artemiy Utekhin
275
_TODO: Permutations_
276
277
Any normal Ruby code is allowed inside the blocks as well as the %run%-type methods, letting you write more complex or inter-dependent templates.
278
279 18 Andrei Tatarnikov
h3. TODO: Labels
280 8 Artemiy Utekhin
281
To set a label write:
282
283 18 Andrei Tatarnikov
<pre><code class="ruby">label :label_name</code></pre>
284 8 Artemiy Utekhin
285
To use a label in an instruction that accepts one (under the hood it''s just a simple immediate #IMM value - just not a pre-defined one until it''s actually defined):
286
287
<pre><code class="ruby">b greaterThan, :label_name</code></pre>
288
289 15 Andrei Tatarnikov
h3. TODO: Debug
290 8 Artemiy Utekhin
291
To get a value from registers use:
292
293
<pre><code class="ruby">get_reg_value("register_name", index)</code></pre>
294
295 15 Andrei Tatarnikov
Right now the pre-processing and the execution of instructions are separated due to ambiguous logic regarding labels and various blocks and atomics. This may be changed later, so these special debugging blocks might become unnecessary. By default what''s written in the template is run during pre-processing so you have to use special blocks if you want to run some Ruby code during the execution stage, most likely some debugging.
296 8 Artemiy Utekhin
297 15 Andrei Tatarnikov
To print some debug in the console during the execution of the instructions use the exec_debug block:
298 8 Artemiy Utekhin
299
<pre><code class="ruby">exec_debug {
300
  puts "R0: " + get_reg_value("GPR", 0).to_s + ", R1: " + get_reg_value("GPR", 1).to_s# + ", label code: " + self.send("cycle" + ind.to_s).to_s
301 14 Andrei Tatarnikov
}</code></pre>
302 8 Artemiy Utekhin
303 13 Andrei Tatarnikov
To save something that depends on the current state of the simulator to the resulting assembler code use exec_output that should return a string:
304 1 Alexander Kamkin
305
<pre><code class="ruby">exec_output {
306
  "// The result should be " + self.get_reg_value("GPR", 0).to_s
307
}</code></pre>