Installation Guide¶

Introduction¶

This document describes the steps should be followed to install С++TESK Testing ToolKit (hereinafter C++TESK). In addition to C++TESK, Icarus Verilog and VeriTool (hereinafter Verilog tools) are recommended to be installed (they are used for generating C/C++ API for Verilog modules).

Before installing the toolkit make sure that System Requirements are met.

Installation¶

Basic Installation (Recommended)¶

To install C++TESK, pass the following steps:

1. Download the latest version of the C++TESK package (cpptesk-toolkit-src-<version-number>.tar.gz) from the Files page.
2. Unzip the downloaded package:
   

   % tar xf cpptesk-toolkit-src-<version-number>.tar.gz
   

3. Run the install.sh script as follows.

• To install C++TESK without installing the Verilog tools, run:
  

  % install.sh
  

• To install C++TESK together with the Verilog tools (∙) not reinstalling the Verilog tools if they have been already installed, run:
  

  % install.sh --install-veritool
  

• To install C++TESK and (re)install the Verilog tools (∙), run:
  

  % install.sh --force-install-veritool
  

  (∙) It should be emphasized that when installing the Verilog tools they are downloaded from the Internet.

Home directories for the tools are chosen according to the following rules:

1. If the environment variable ISPRAS_HOME is not set, ISPRAS_HOME=<user-home-directory>.
2. If the environment variable CPPTESK_HOME is not set, CPPTESK_HOME=$ISPRAS_HOME/tools/cpptesk-toolkit.
3. If the environment variable ICARUS_HOME is not set, ICARUS_HOME=$ISPRAS_HOME/tools/verilog.
4. It the environment variable VERITOOL_HOME is not set, VERITOOL_HOME=$ISPRAS_HOME/tools/veritool.

C++TESK is installed into the directory $CPPTESK_HOME.

Icarus Verilog and VeriTool (if they are required) are installed into $ICARUS_HOME and $VERITOOL_HOME, respectively.

Manual Installation of the Verilog Tools¶

The Verilog tools can be installed manually (it might be useful if the target computer is not connected to the Internet, but there is another computer that can be used for downloading the packages).

To install Icarus Verilog, pass the following steps:

1. Download the package from here.
2. If the environment variable ICARUS_HOME is not set, assign an appropriate value:
   

   % export ICARUS_HOME=<path-to-icarus-verilog-installation-directory>
   % echo "export ICARUS_HOME=$ICARUS_HOME" >> "$HOME/.profile" 
   % echo "export ICARUS_HOME=$ICARUS_HOME" >> "$HOME/.bashrc" 
   

3. Create the $ICARUS_HOME directory if it does not exist:
   

   % mkdir -p "$ICARUS_HOME" 
   

4. Unzip the downloaded package and compile the sources:
   

   % tar xf verilog-<version-number>.tar.gz
   % cd verilog-<version-number>
   % ./configure --prefix="$ICARUS_HOME" 
   % make && make install
   

To install VeriTool, pass the following steps:

1. Download the package from here.
2. If the environment variable VERITOOL_HOME is not set, assign an appropriate value:
   

   % export VERITOOL_HOME=<path-to-veritool-installation-directory>
   % echo "export VERITOOL_HOME=$VERITOOL_HOME" >> "$HOME/.profile" 
   % echo "export VERITOOL_HOME=$VERITOOL_HOME" >> "$HOME/.bashrc" 
   

3. Create the $VERITOOL_HOME directory if it does not exist:
   

   % mkdir -p "$VERITOOL_HOME" 
   

4. Unzip the downloaded package and compile the sources:
   

   % tar xf veritool-<version-number>.tar.gz
   % cd veritool-<version-number>
   % ./configure --prefix="$VERITOOL_HOME" 
   % make all && make install